228 results found

1. Make the cool down optional in WorkoutBuilder

   Make it possible for workouts to include a custom cool down or no cool down.

   Currently workouts sent to an athletes device (at least a Garmin device), include an extra "cool down" step added automatically to the end of the workout. Several of my athletes have found this confusing, as it does not appear in TP as a step in their daily workout.

   The attached image shows the result of a two-step workout (warmup, followed by a single run interval), as viewed on the athletes Garmin watch. Notice the third step, not prescribed in the workout or show in TP.

   I would suggest an option in Workout Builder in each workout (perhaps just a checkbox) to control whether a cooldown is automatically added to the workout. This would allow the coach to control the cooldown, adding their own cooldown if desired.

   Also, if the cooldown is going to be added, show it as part of the workout, so it's not a surprise to the athlete.

   Make it possible for workouts to include a custom cool down or no cool down.

   Currently workouts sent to an athletes device (at least a Garmin device), include an extra "cool down" step added automatically to the end of the workout. Several of my athletes have found this confusing, as it does not appear in TP as a step in their daily workout.

   The attached image shows the result of a two-step workout (warmup, followed by a single run interval), as viewed on the athletes Garmin watch. Notice the third step, not prescribed in the workout or show in TP.

   … more

   •  

   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Put all workouts from purchased training plans into a folder in the workout library for future use

   When you purchase a training plan, all of the unique workouts should be saved into a folder automatically.

   Let's say you finish a workout plan and really liked how they structured some of the workouts. I have to go back in time, find the workout I liked, save it as a unique workout, and then drag it to my future plans.

   I own the plan. I own all the workouts inside the plan. It's just a pain to use individual workouts with a lot of efforts.

   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. I really should be able to see my estimated form on the mobile app for workouts scheduled in the future

   I really should be able to see my estimated form on the mobile app for workouts scheduled in the future. This is available on the desktop site

   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Open API or MCP access for coaches

   The tech world is moving at a rapid pace right now and the way we interact with our computers is changing.

   As a coach with a lot of clients the process of using the web front end to add workouts is time consuming and inefficient. It's easier than ever for us to customise ways of creating and uploading training plans and comments but to do this we need proper open API access or an MCP server. This is coming to everything and TrainingPeaks should get ahead of the game.

   Continuing to maintain a very closed shop here will start to push coaches to other platforms who are providing proper API access for us to build our own ways of loading workouts and data into our coaching platform.

   The tech world is moving at a rapid pace right now and the way we interact with our computers is changing.

   As a coach with a lot of clients the process of using the web front end to add workouts is time consuming and inefficient. It's easier than ever for us to customise ways of creating and uploading training plans and comments but to do this we need proper open API access or an MCP server. This is coming to everything and TrainingPeaks should get ahead of the game.

   Continuing to maintain a very closed shop here will start to… more

   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. chaussures

   Bonjour,

   Proposition : afficher une petite icône « chaussure » dans chaque case du calendrier/agenda lorsqu’une paire a été renseignée pour la séance, à l’instar des icônes RPE ou État de forme.

   Contexte : il est possible d’enregistrer dans une séance quelle chaussure de son inventaire a été utilisée. Toutefois, cette information n’apparaît pas directement dans la vue calendrier : on peut voir le RPE et l’état de forme, mais pas la chaussure. Cela oblige à ouvrir chaque séance pour vérifier le matériel, rendant le suivi du parc de chaussures peu pratique.

   Objectifs

   Permettre un repérage visuel rapide du matériel utilisé.
   Faciliter la gestion de la rotation des chaussures et le suivi d’usure (prévention des blessures, planification de remplacement).
   Offrir une information utile aux coachs et aux athlètes sans alourdir la vue calendrier.
   Proposition de design et comportement

   Affichage : ajouter une petite icône de chaussure dans la case de chaque séance qui a une paire renseignée. L’icône serait située près des autres indicateurs (RPE, état de forme).
   Icône par défaut : pictogramme simple d’une chaussure de course (SVG).
   Icônes personnalisées (optionnel) : possibilité d’afficher une miniature/photo du modèle si l’utilisateur a ajouté des images à son inventaire de chaussures.
   Interaction : cliquer (ou survoler) l’icône ouvre une infobulle ou le panneau de détails avec :
   Nom du modèle utilisé,
   Kilométrage total effectué avec ce modèle (au moment de la séance),
   Kilométrage ajouté lors de la séance,
   Notes éventuelles associées (sensation, problème).
   Réglages : option dans les préférences d’affichage pour activer/désactiver l’affichage des icônes chaussures dans le calendrier.
   Indicateur d’usure (optionnel) : petit badge couleur (par ex. orange/rouge) si la paire dépasse un seuil défini de kilométrage (paramétrable par l’utilisateur), pour alerter sur un remplacement à prévoir.
   Fonctionnalités complémentaires utiles

   Filtrage : possibilité de filtrer le calendrier pour n’afficher que les séances courues avec un modèle donné.
   Rapport : inclure la colonne « chaussure utilisée » dans les exportations/rapports CSV/Excel.
   Statistiques : résumé des km par paire sur une période (facilement accessible depuis la fiche chaussure).
   Bénéfices utilisateur

   Gain de temps : plus besoin d’ouvrir chaque séance pour savoir quelle paire a été utilisée.
   Meilleure gestion du matériel : suivi simple de la rotation et de l’usure.
   Support à la prévention des blessures : repérage rapide des paires usées.
   Valeur ajoutée pour les coachs : visibilité rapide du matériel des athlètes.
   Arguments de priorisation

   Faible effort d’implémentation côté front-end (ajout d’une icône et lecture d’un champ déjà existant).
   Données déjà saisies par les utilisateurs — aucune nouvelle donnée obligatoire à collecter.
   Fort impact sur l’expérience utilisateur pour les coureurs réguliers et les coachs.

   Bonjour,

   Proposition : afficher une petite icône « chaussure » dans chaque case du calendrier/agenda lorsqu’une paire a été renseignée pour la séance, à l’instar des icônes RPE ou État de forme.

   Contexte : il est possible d’enregistrer dans une séance quelle chaussure de son inventaire a été utilisée. Toutefois, cette information n’apparaît pas directement dans la vue calendrier : on peut voir le RPE et l’état de forme, mais pas la chaussure. Cela oblige à ouvrir chaque séance pour vérifier le matériel, rendant le suivi du parc de chaussures peu pratique.

   Objectifs

   Permettre un repérage visuel rapide du matériel… more

   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Feature Request: Metric Default in Strength Workout Builder

   Problem

   Currently, the Strength Workout Builder defaults to imperial units (lb), even when:

   The user’s account settings are set to metric
   The endurance side of TrainingPeaks correctly operates in metric

   While it is possible to manually change units within individual exercises or workouts, this is not persistent and must be repeated each time.

   This creates a system-level inconsistency and repetitive manual overhead.

   Why This Matters (Practical Impact)

   For coaches operating in metric regions (Australia, UK, EU):

   Requires manual unit switching for every workout or exercise
   Introduces unnecessary cognitive load (constant kg ↔ lb awareness)
   Increases risk of programming errors
   Creates workflow friction at scale (especially with multiple athletes)
   Results in a disjointed athlete experience (mixed unit systems)

   In practice: endurance = metric, strength = manually corrected every time → breaks flow and efficiency

   Current Behaviour
   Account set to metric → works correctly for endurance workouts
   Strength Builder → defaults to lb
   Units can be changed manually per exercise/workout, but:
   Not persistent
   Not inherited
   Not scalable
   Expected Behaviour

   The Strength Workout Builder should support persistent unit preferences.

   Option 1 (Preferred): Global Inheritance
   Automatically inherit units from:
   Account Settings → Unit Preferences
   Option 2: Strength-Specific Default Toggle
   Provide a single setting within Strength Builder:
   Default units = kg / lb
   This setting should:
   Apply to all new workouts
   Persist across sessions
   Remove the need for repeated manual changes
   Why This Is Important (Product Perspective)

   This is not about adding functionality, it’s about removing friction from an existing one.

   It directly impacts:

   Workflow efficiency (core product promise)
   Adoption outside the US
   User trust in system consistency
   Scalability for coaches managing multiple athletes

   Current behaviour solves the problem technically, but not operationally.

   Suggested Enhancement (Best Implementation)
   Link Strength Builder unit defaults to:
   Account Settings → Unit Preferences
   OR introduce:
   Persistent “Default Unit” setting for Strength Workouts

   Ensure:

   All input fields default correctly (kg)
   Athlete view reflects consistent units
   Future analytics respects the same unit system
   Optional Future Improvement
   Allow per-athlete unit overrides for international coaching scenarios
   Summary

   This is a small change with disproportionate impact:

   Eliminates repetitive manual steps
   Reduces programming errors
   Improves global usability
   Aligns strength with the rest of the TrainingPeaks ecosystem

   Right now, the system requires constant correction.
   This feature would make it correct by default.

   Problem

   Currently, the Strength Workout Builder defaults to imperial units (lb), even when:

   The user’s account settings are set to metric
   The endurance side of TrainingPeaks correctly operates in metric

   While it is possible to manually change units within individual exercises or workouts, this is not persistent and must be repeated each time.

   This creates a system-level inconsistency and repetitive manual overhead.

   Why This Matters (Practical Impact)

   For coaches operating in metric regions (Australia, UK, EU):

   Requires manual unit switching for every workout or exercise
   Introduces unnecessary cognitive load (constant kg ↔ lb awareness)
   Increases risk of programming errors
   Creates… more

   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Integration from TP Virtual to Garmin Connects

   Integration from TPVirtual automatically to Garmin Connects.

   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Be able to work offline so that any comments or adjustements are saved and uploaded when connection occurs. It can be a coaches only feature
   1 vote

   Vote 0 votes Vote Vote

   Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   1 vote 2 votes 3 votes Remove votes

   You have left! (?) (thinking…)
   0 comments  ·  Programming  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating