129 results found
-
Colour coded training plans
Please let athletes assign different colours to active training plans that they have purchased.
I have purchased, and have on my calendar, both road and MTB cycling plans. I use/complete some of each, however, can’t at a glance tell which is which. It would be great to be able to assign a colour to the plan and then see, in my calendar, which plan is for which program.3 votes -
Notifications when coach or athlete adds or updates a NOTE
The new note feature is good but would be better if the coach and / or athlete received a notification if either added or updated a NOTE - basically the same functionality as workouts, other etc
17 votesThank you for the feedback. This has been added to that project’s feedback.
Considered opportunities have not been added to our road map yet, but we are actively collecting feedback which contributes to the prioritization process. We do not want to set up false expectations and want to make sure that there is awareness that this update currently is not prioritized and does not have an ETA.
-
Some suggested tweaks to TrainingPeaks Daily Workout IQ App
Hi there
I have the TrainingPeaks Daily Workout IQ App and use it 4 times a week on my structured plan.
I am enjoying the workouts and am benefitting from them
I would like to suggest a couple of tweeks to the app though.1 Could it be made to have cadence on the page as a lot of the workouts have a cadence target also.
2 Could the app be made a 2 page item with the second page being the workout summary as sometimes it is useful to have a reminder of what the upcoming segments are
3…3 votesOnce you are performing the workout you are no longer in the TrainingPeaks CIQ app, instead you are back in Garmin’s workout interface. We are not able to directly make any modifications to Garmin’s workout interface, but we can send your feedback to the the team at Garmin. We have already sent them a request that at least one of the data fields on the workout screen be customizable. This would allow you to add cadence to that screen. Until then, you can still access all the other data screens on your Garmin device, just page left/right or up/down as usual. Even when not on the workout screen, you will still get in/out of range alerts and notifications when starting the next step along with what the new target is. You can also create a custom page with cadence and most of the workout fields. When adding data fields to…
-
Add Apple Watch App
Extend your iOS support to include Apple Watch. I frequently used TP plans in the past and used the Garmin software to send the TCX files to my watch until Garmin phased that out and make it an unworkable solution. Now they've left the door open for TP to make an Apple Watch app where your daily workout could be done right there on your Apple Watch including all of your pacing data, intervals, and the like and sync the workout to TP natively without any extra hoops. With Apple Watch being the #1 watch on the market (not just…
221 votesRight now we do not plan to write our own workout app for the Apple Watch. There are multiple apps already available for this that are compatible with TrainingPeaks. There are also multiple apps that will read data from HealthKit and write it to TrainingPeaks. We are working with a few developers to support our structured workouts as well.
These are a few apps that read data from HeathKit and write it to TrainingPeaks that we recommend.
https://itunes.apple.com/us/app/healthfit/id1202650514
https://itunes.apple.com/us/app/workout-exporter/id1262831404?mt=8
https://itunes.apple.com/us/app/rungap-workout-data-manager/id534460198?mt=8
https://itunes.apple.com/us/app/fitnesssyncer/id1159207899?mt=8These are a few apps for recording workouts for Apple Watch, that are better than Apple’s workout app, that we recommend.
https://itunes.apple.com/us/app/ismoothrun-pro/id410965399?ls=1&mt=8
https://itunes.apple.com/us/app/rungap-workout-data-manager/id534460198?mt=8
https://itunes.apple.com/us/app/wahoo-runfit/id999357779?mt=8 -
Could you please implement to read data about weight, fat, water body composition, BMR, from Tanita devices, or, at least, from AppleHealth?
Could you please implement to read data about weight, fat, water body composition, BMR, from Tanita devices (MyTanita app), or, at least, from AppleHealth?
1 voteThere are multiple options for syncing Apple Health data to TrainingPeaks. This blog article lists some of the more popular apps.
https://www.trainingpeaks.com/blog/how-to-use-trainingpeaks-with-your-apple-watch/The HealthFIt app is probably the most robust of the syncing apps, as it supports these 13 wellness metrics:
- HRV
- RHR
- Steps
- Sleeps (hours and numberTimeWoken)
- body weight
- body fat
- bmi
- spo2
- blood pressure
- water consumption
- Insulin delivery
- blood glucose
- menstruation -
Export 0watt blocks as FreeRide segments to Zwift
Using free-ride segments in Zwift is often used for short max efforts. Now its not possible to export certain blocks as a free-ride segment i.s.o. a steady-state segment. This means you still need to edit the workout in Zwift.
A solution would be that a block set to 0 watt would be exported to a free-ride segment for a Zwift workout.
22 votesRPE based workouts can now be exported to Zwift. These workouts use Free Ride blocks along with text messages to communicate the target RPE. During a free ride block the trainer will be in ERG mode and respond to changes in the simulator. This is a good option for building FTP test workouts since the trainer will not be locked in to a specific power target.
-
Set Workout builder to measure by Zone
Love the new Workout builder, but would like to measure by zones. Easier to select zone than to reenter the %HR since I've already the appropriate ranges for each zone in setup.
2 votesGreat suggestion. We’ve struggled with this as the workout may be created based on a zone methodology different from an athlete’s or multiple athletes’ zones. Thus Zone 2 per the workout may not map correctly to different users depending on each users’ specific zone settings. We will continue to look into this as we agree planning and execution of workouts is often based on zones – we’re just wanting to ensure if we do enable this, it’s usable for athletes with differing zone settings/methodologies. Thanks for your feedback!
-
Sport specific units?
Would be great to be able to have units as say statute for bike& run but metric for swim as we have 25mtr pools in uk?
Most uk athletes I know run & bike in miles but swim in Mtrs.4 votesAt this point, you can change your specific swim units within your workout separate from your overall unit settings. Unfortunately, swimming is the only category we’ve enabled separate units for at this time. Thanks for your feedback.
-
Offline work in coaching edition and sync when Internet service returns
I see a real need for the TP Coaching Edition to have the functionality to be used offline when connectivity is not available so you can write programs. When service is established, a synch would occur.
18 votesThanks so much for your feedback. While we agree that off-line planning mode would provide an opportunity for training prep and analysis when connectivity is not available, this would require a major redesign of our platform and thus not something we could tackle in the near-term.
-
Bring back functionality of strength workouts
In Training Peaks Classic, you could create sets, reps, ranges, etc and add specific exercises while building out a strength workout. These exercises would have complete descriptions that were created, making them very easy to follow.
In the new software, all the classic workouts have become read only with no way to adjust exercises. All new strength workouts require all info to be placed into the workout description which is not only time consuming, but confusing and ineffective for athletes.
I think we can all agree that strength training is a very important part of endurance performance and injury prevention.…
219 votesWhile we do offer a structured workout builder, we do not provide strength specific workout creation. Please give out partners at TrainHeroic.com a try – they offer a fantastic strength based platform!
-
Add Efficiency Factor and other advanced metrics to the Reporting Dashboard Chart
Add Efficiency Factor and other advanced metrics to the Reporting Dashboard Chart.
These are extremely useful metrics, but they do no good when buried in the workout details.
It would be helpful to chart them over time, and correlate them against other metrics in the scatter plot
91 votesEfficiency Factor and other decoupling metrics are currently available for reporting in WKO4. You can download a 14 day trial of WKO4 for Mac here, the PC version will be available by the end of the year.
http://home.trainingpeaks.com/products/wko4 -
Allow user-selected First Day of the week (or at least allow Sunday as an option)
Please allow the calendar week to start on Sunday.
It is hard to reconcile this calendar with others when the weeks do not line up. Please fix this. I need Sunday to be the first day of the week so that it matches other calendars.
29 votesMaking this change is not on our current roadmap. However it may be something that we consider in the future.
-
Pre-Activity Comments
I understand the intent of the pre-activity notes but from a user standpoint it does not make sense to me. Please consider a user accessible pre-activity section to record technique comments aside from the actual workout specifics. As a self coached athlete I would find this area useful to input work out tips and techniques to consider or pre-race focus ideas... Restricted areas within a personal training log don't make sense to me as a user... Please consider this as an RFE..
3 votes -
Workout duplicates, triplicates, etc
The new syncing tools (ex. Garmin AutoSync or tapiriik) are very handy for athletes. However they have introduced a new problem. Athletes without the necessary attention or guidance just activate everything from different platforms and the same workouts just start syncing without checking if that file is already at TP. The end result: duplicates, triplicates, etc. As a coach I would like to have a tool where duplicates, triplicates, etc would be detected and offered a solution to fix it. Thanks.
6 votes -
Add support for Pioneer device files (.db)
Pioneer head unit data is in .db format (sqlite I believe) and is supported by CyclingAnalytics. TrainingPeaks should support this filetype directly.
1 voteSupporting Pioneer device files is something we are considering for WKO4.
-
The paid accounts need to have a function in which I can create a training plan and save it in a personal library and then apply and reapply
The premium accounts need to have a function in which I can create a training plan, save it in a personal library, and then apply and reapply as needed. I run several of the same races every year and want to simply apply a plan. I know I can copy a week, but going week by week from a year ago to "today" is an unnecessary step in what should be a click and drop style solution.
5 votesThis is a feature available to coached. Currently there are no plans to add this functionality to an athlete account.
-
Update workouts in plans after editing in library
Here's how I think this could work. When you update a workout in your library, there could be a radio button that says "update workouts across all plans". When I make edits to a workout to improve it, sometimes it'd be nice to be able to make sure it's updated in all workouts. Sometimes this isn't necessary or desired, so having the option would be good. thanks
10 votes -
Threshold History
Is there a way to look at your threshold history? That could be a good macro view to have access to.
14 votesThis is not available in TP yet, but will be a feature of WKO4.
-
Customize fitness history
Would be great if we can customize the intervals in TP Fitness History. Standard are 5sec, 1m, 5m, 20m, 60m. would be great to be able to add our own (i.e. 10m, 30m, etc)
2 votesWe do not have plans to allow custom durations for the Peaks calculation. However, this is a feature of WKO.
-
offline mode for mobile apps
I would like to be able to see upcoming and recent workouts (7 days in either direction would be nice).
Use cases include sitting on a plane, or when I'm roaming and trying to minimize data usage.
8 votes
- Don't see your idea?