104 results found
-
Ability to resync/push completed Virtual workout back to Training Peaks.
Started todays workout with positivity for App, ended in frustration!
Kickr v5, Direct connect (LAN) & Apple TVApple TV remote works better
Single login page (Less clicks)
Todays synced work shows first (Less Clicks)
Prefer virtual ride feel over Zwift (How the view tilts and brakes in view 3)
Start ERG interval workout (Frustration starts)
No ERG control, stuck in terrain (matches world) Power & Cad showing
Checked trainer profile defaulted to Blue tooth, changed to LAN still no control.Stop workout, delete so TrainingPeaks data field is not effected, Restarted APP and all devices, still the same...Repeated
3rd…
1 voteMany thanks for letting us know about this, and your support for TrainingPeaks Virtual.
There was an isolated issue with synchronisation of FIT files from TPV to TP at the time of your ride, that was quickly resolved. In general, the files already synchronise for every ride, and we'll continue to look at making that process more resilient in the future rather than tracking this as a separate issue in UserVoice.
The other points you raise are actually already covered by other entries in UserVoice, so will close this ticket down and we'll still track the completion of them.
-
Do not override primary power source when entering on a race/event
I set in Trainer settings my assioma power meter preferred to be used as primary power source. However if I enter a race, then TPV automatically switches to the power meter of my HTR, when HTR is required for that event/race.
My issue is that my HTR has an internal power meter but this one is quite bad and exposes much more high watt figures than i produce and i don't want to use it. In zwift i can participate to events/races with my calibrated assiomas power meter. I would llke the same in TPV. Pls do not override my…3 votesMany thanks for your suggestion and support for TrainingPeaks Virtual.
The use of the powermeter as the primary source of power is only over-ridden in events where the organiser has selected that the primary source of power must be from a smart trainer. In all other events, then the option to use a powermeter to determine your power is retained.
As such, this function is working exactly as intended. If you want to use a powermeter as the primary source of power, then you will need to enter events where the event organiser has not decided to disallow that.
-
syncing issues
Having similar issues as others with rides not syncing back to TP. Group ride from yesterday did not sync. Saved in history.
1 voteMany thanks for letting us know about this, and your support for TrainingPeaks Virtual.
There was an isolated issue with synchronisation of FIT files from TPV to TP yesterday, that was quickly resolved. In general, the files already synchronise for every ride, and we'll continue to look at making that process more resilient in the future rather than tracking this as a separate issue in UserVoice.
-
rides not synced or appearing
Rode yesterday with TPV on iphone. Paused after 2.5 hours to get a drink. When returned, the ride had ended. Not the end of the world and the ride does appear within TPV log, however, it is not syncing with TP. ANy way to fix this?
Additionally, I then started another ride, using the same workout option from the Train section. I used the segments, just advanced the main one after 2 hours and completed this ride. This, however, has completely failed to appear anywhere (neither TPV nor TP). Again, help and advice would be appreciated.
3 votesMany thanks for letting us know about this, and your support for TrainingPeaks Virtual.
There was an isolated issue with synchronisation of FIT files from TPV to TP yesterday, that was quickly resolved. In general, the files already synchronise for every ride, and we'll continue to look at making that process more resilient in the future rather than tracking this as a separate issue in UserVoice.
-
Send a completed activity from TPV into TP after sync issues (apple tv)
It should be possible to easy send a completed activity from tpv into tp after sync issues on apple tv. Now I can see a completed activity but no way to send it to TP. It would be great to have this option for TPV/TP
2 votesMany thanks for letting us know about this, and your support for TrainingPeaks Virtual.
There was an isolated issue with synchronisation of FIT files from TPV to TP yesterday, that was quickly resolved. In general, the files already synchronise for every ride, and we'll continue to look at making that process more resilient in the future rather than tracking this as a separate issue in UserVoice.
-
Verbindung mit apple tv
Die Verbindung am Apple TV kommt nicht zur Stande.
Sobald ich auf OK drucken, zum anmelden mit ein bestehendes Konto passiert nichts.1 voteMany thanks for reporting this, and your support for TrainingPeaks Virtual.
Please can you reach out to Customer Support (virtual@trainingpeaks.com) who can help you resolve this.
-
bonjour, quand je lance l'application sur mon pc j'ai un message Updating process failed! même je réinstalle plusieurs fois l'application.
bonjour, quand je lance l'application sur mon pc j'ai un message Updating process failed! même je réinstalle plusieurs fois l'application.
1 voteMany thanks for reporting this, and your support for TrainingPeaks Virtual.
Please can you reach out to Customer Support (virtual@trainingpeaks.com) who can help you resolve this.
-
v0.4.5 Avatar not moving
Since Friday morning, the TP Virtual has loaded correctly. In Ride mode, the avatar is on the screen, the sensor metrics are dislplayed, but when I begin pedaling the avatar does not move and the power and cadence metrics do not show. This happens in Workout mode, too.
1 voteMany thanks for reporting this, and your support for TrainingPeaks Virtual.
Please can you reach out to Customer Support (virtual@trainingpeaks.com) who can help you resolve this.
-
install
Tpv Freezes
1 voteMany thanks for reporting this, and your support for TrainingPeaks Virtual.
Please can you reach out to Customer Support (virtual@trainingpeaks.com) who can help you resolve this.
-
Support for more HR sensors
There is already a suggestion or report to support the Wahoo HR sensor, but many cheaper Chinese HR brands (Magene, Cycplus) either do not work at all or work unreliably (on Apple TV, via Bluetooth). These HR sensors work perfectly with Zwift, so it is technically possible to support them.
1 voteMany thanks for your suggestion and support for TrainingPeaks Virtual.
As far as we are aware, TrainingPeaks Virtual already supports all known Heartrate Monitors. It is therefore far more likely that the reason why a heart rate monitor does not appear to be working is due to the Apple TV hardware Bluetooth connection limit. Please see the following article for more details.
TrainingPeaks Virtual on Apple TV – TrainingPeaks Help Center
That said, If there is a specific make/model of Heartrate Monitor that is not working with other platforms (e.g. on PC / Mac), then please do raise this as a explicit new request and we can add support for it for you.
-
custom workout
On my ipad i've added custom workouts files in /TPVirtual/Workouts.
As indicated.however i can see none of them appear when I select in TPV :
train -> Custom WorkoutsWhy ?
Thanks,1 voteMany thanks for your message and support for TrainingPeaks Virtual.
Can you please reach out directly to Customer Support at virtual@trainingpeaks.com who can help you resolve this.
-
Can’t seem to connect to my Garmin Fenix 6 when I have broadcast heart rate turned on
Would be nice to be able to connect my Garmin Fenix 6 as my Heartrate monitor when I have turned on the Broadcast heartrate option on the watch
1 voteMany thanks for your suggestion and support for TrainingPeaks Virtual.
This however appears to be an issue between your watch and Garmin, and not something that TrainingPeaks Virtual can help resolve.
-
Delay with resistance and the course profile, spiking and dropping, not smooth!?
Not an idea, more a query
2 votesMany thanks for your message and support for TrainingPeaks Virtual.
This appears to be an issue with your trainer, rather than the TrainingPeaks Virtual software. Please can you contact customer support at virtual@trainingpeaks.com who may be able to help you fix this.
-
Anyone having power resistance spikes?
When doing workouts, when the target power changes up/down I get huge power resistance (500-600-700W) before it then balances back down to what it’s supposed to be.
Does anyone else get these or have I done something wrong in setup?3 votesMany thanks for your message and support for TrainingPeaks Virtual.
This appears to be an issue with your trainer, rather than the TrainingPeaks Virtual software. Please can you contact customer support at virtual@trainingpeaks.com who may be able to help you fix this.
-
Wattbike Atom pedal metrics
I’m using a Wattbike Atom but some of the information isn’t being displayed on the screen. You can see on the picture there are some blank fields. The pedal effectiveness dynamics are really useful so it would be good to see them displayed or have the opportunity to choose them. The Atom also has additional buttons on the lever hoods which would be good to enable.
1 voteMany thanks for your suggestion and support for TrainingPeaks Virtual.
TrainingPeaks Virtual displays whatever data your devices are transmitting, so if smoothness / effectiveness aren't being displayed, then this is because your pedals aren't broadcasting that information to TrainingPeaks Virtual.
If you would like this data to be available, then you would need to speak to the equipment manufacturer to get them to update their firmware to broadcast it...and then TrainingPeaks Virtual will automatically display it for you.
-
report
Hi, it's not an idea but a report. I have a tacx neo bike, I can't understand why in terrono mode when I'm on the flat the resistance increases, while when going uphill the resistance decreases. Practically the opposite. I tried to set and try all the options on the settings page but it didn't change
Thank you1 voteMany thanks for your message and support for TrainingPeaks Virtual.
This appears to be an issue with your trainer, rather than the TrainingPeaks Virtual software. Please can you contact customer support at virtual@trainingpeaks.com who may be able to help you fix this.
-
Make it possible for those who have transferred from IndieVelo to find their profile and rides. I haven't a clue and am not happy
IndieVelo transfer is impossible
1 voteMany thanks for your message and support for TrainingPeaks Virtual.
Merging of your indieVelo account to your TrainingPeaks account is already fully supported. Please just email Customer Support at virtual@trainingpeaks.com who can assist you with this.
-
TPV doesn't run
Been using indieVelo for over a year. TPV doesn't run, just stuck at 100% screen.
1 voteMany thanks for your comment and support for TrainingPeaks Virtual.
Please can you contact Customer Support directly at virtual@trainingpeaks.com who can help diagnose this issue for you.
-
anders@buschardt.dk
ERG is not working on my iPad/Tacx Neo setup - a setup where ERG works on both Zwift and TrainerRoad. I have tried with workouts importet from TP and workouts supplied by TPV. I have also tried checking / un-checking the Auto-Release ERG Mode whithout any impact.
1 voteMany thanks for your comment and support for TrainingPeaks Virtual.
Please can you contact Customer Support directly at virtual@trainingpeaks.com who can help you diagnose this issue.
-
Recurring events
Add the ability to create recurring events, daily, weekly, monthly, etc. until a certain date or a certain number of times.
1 voteMany thanks for your suggestion and support for TrainingPeaks Virtual.
As another commenter has already noted, TrainingPeaks Virtual deliberately doesn't expose the ability to create recurring events to avoid spam on the calendar. You can however already just press the "copy" button which is displayed against your previously run events to create another one very easily (but deliberately, only one at a time).
.png){kind=link}
- Don't see your idea?