463 results found
-
WORKOUTS: FTP Test Issue
Today I have done the FTP test, The 20’ all out effort isn’t structured properly. I had issues with the power distribution and cadence. The two were not properly correlated. I’m sure there is something to do to improve. I was using the wahoo kickr core as trainer
1 vote -
PAIRING: Add support for the Movesense MD ECG sensor on TPV
The number one cause of sudden death in athletes 35+ yo is cardiovascular. Besides that, AFib is the leading arrhythmia in endurance athletes. Let's improve TrainingPeaks Virtual, TrainingPeaks, and WKO5 by integrating real-time ECG plotting and post-session review capabilities with the Movesense MD sensor. This feature would allow athletes, coaches, and sports medicine physicians to gain a deeper understanding of their cardiovascular system during long exercise sessions.
1 vote -
MECHANICS: Public viewable effort gauge improvements
The effort gauge needs overhauled to make visual efforts consistent among riders in the same group \ pacing level.
TrainingPeaks Virtual pacer bots and effort indicators are designed to work as follows:
*Personalization of Pacebot Effort: Each pacer bot (like Oli Obsidian or Cyril Citrine) is intended to deliver a pacing experience that is tailored to you personally. The system factors in your user profile, especially your current weight and the specifics of the route (such as hills versus flats), to calculate how much power you’ll need to keep up with each bot. Heavier riders, for example, will need more…1 vote -
EXTERNAL: Training load, TSS, ATL, CTL, etc doubled when pair with Garmin Connect
When TP is connected to Garmin Connect and doing a ride where the ride is saved via TPV and from a Garmin device, the ride's stats get doubled. This is due to the data being saved from TPV and then pulled down again from Garmin Connect.
TP should be smart enough to pull the most complete (data accurate) version of the same ride. This is what's done with Garmin Connect.
When riding outside, I'll track the ride with a Garmin Edge 1050 and a Fenix 8 pro. When both devices sync, Garmin is smart enough to use the most accurate…
1 vote -
MECHANICS: Pacebots are not available in Zen mode
Pacebots are not available in Zen mode. This is due to how zen mode was implemented in that you don't see other riders, but other rides technically still see you (no name).
Pacebots need added in for riders in zen mode who want pushed.
1 vote -
MECHANICS: New bike type: fixie \ single speed
There should be a new bike type that can be selected in TPV for those of us that ride fixie or single speed.
Be nice for a UI option for single speed mode to prevent\ignore shifting. This would help others realize why a rider's cadence maybe very high or low compared to other near by riders or those in a group.
1 vote -
UI/UX: Show full (not truncated) workout title
I really hate that I can't see the full workout title (in both, mobile and desktop) and I need to click on "edit" to be able to read it.
Just display it fully in multiple lines if needed, I have no idea why it was put as "one line".
My workout titles are often longer and have some important info added in the end (and later in description), but why truncating the title???1 vote -
UI/UX: Visual indication (UI) that HUDs are hidden.
Visual indication (UI) that HUDs are hidden ←Please add.
"h" toggles all HUDs displayed/hidden.
There is no on-screen control for this. There is no setting for this, afaict. There is no indication, visual or otherwise, that all HUD’s are toggled off. This is barely mentioned in the documentation. It does not come up when searching for, e.g.: “TrainingPeaks Virtual HUDs not showing”. Google’s robotic donkeys braying from distant hilltops (so-called “AI”) does not mention this shortcut.
The shortcut is useful. The documentation less so, and the UI not at all. Please somehow promote this information in the documentation, add a…
1 vote -
MECHANICS: Team outfit automatic equipment for team members.
There is a bug still unresolved.
The members of my team are not automatically equipped with the team outfit.
If they equip themselves with the outfit and leave TPV while saving, they are still not equipped by default with the correct outfit when they reconnect.
When I was a member of IndieVelo, it worked perfectly... that’s no longer the case today!
It is necessary that this bug be corrected as soon as possible!Thank you in advance for your feedback on this subject.
1 vote -
WORKOUTS: More than a 2 step repeat in TPV
Is it possible to get more than a 2 step repeat , yes there is 3 and you can add intervals however it doesn't group them together. What happens is the whole left side of my monitor gets filled up with intervals. Its kinda depressing because itll say you have 50 more to go and I have to correct myself say no I only have 10 more to go.
1 vote -
UI/UX: Present the rubber band strength on screen.
Show the band strength on screen as a metric.
1 vote -
FIT FILES: Add option to always record power from powermeter in the .fit file
When there are two power sources (trainer and powermeter), the "power" field of the .fit file always contains the power source that was used to make your avatar move in game. The other power source is saved in a custom data field.
I would like an option to always save the preferred power source in the "power" field of the .fit file, even when the game effectively uses the power from the trainer to make the avatar move. In this case the power from the "non-preferred" source would be saved to a custom field.
The problem with the way the…
1 vote -
UI/UX: Dashboard shows power from trainer twice
When the "Powermeter Preferred" option is selected and you enter a race that enforces power from the trainer, the UI displays the power from the trainer twice: once in the primary dashboard as expected ("Power Current" data field), but also in the secondary dashboard ("Power Secondary" data field).
See the attached screenshot. This is with the default dashboard settings.
Instead, the "Power Secondary" data field should always display the power source that is not already displayed in the "Power Current" data field.
1 vote -
PAIRING: Auto-Pairing should use BLE UUID
Dear TrainingPeaks Team,
we are writing to report a reproducible and blocking issue with TrainingPeaks Virtual on Apple TV, which significantly impacts our real-world usage.
Real-world setup:
- 2 people training at the same time
- in the same room
- using 2 different trainers (Elite Suito-T, different serial numbers) on 2 separate Apple TVs with 2 separate instances of TrainingPeaks Virtual
Issue:
TrainingPeaks Virtual does not persistently store the associated trainer on Apple TV.
At every app restart, the app performs a fresh Bluetooth scan and connects randomly to one of the available Elite Suito-T trainers, ignoring the trainer selected in the…1 vote -
PAIRING: Support incline data in ERG mode
When I ride in TPV not in a workout/ERG mode, my smart trainer (Tacx Neo 2T) and incline device (Tacx Alpine) accurately adjust to changes in incline. However, when I’m riding in a workout in ERG mode, the incline stays at zero percent the entire time. By contrast, when I ride in other apps, e.g., Zwift, in ERG mode I still get the changes in incline as I ride across varied terrain.
This is frustrating as I don't get to train the changes in muscle position that I otherwise would. It doesn't match with the way TPV presents itself with…
1 vote -
UI/UX: Change the text of "Warm up/Cool Down" from zwo files to "Ramp up/Ramp Down"
It more a cosmetic change, but ramps can occur in the middle of a workout and "warm up/cool down" doesn't make sense in those instances. "Ramp up/down" would work even for the first/last blocks
1 vote -
PAIRING: Wahoo Kickr / TPV (BLE, DC) can't pair
Win10 system, Wahoo Kickr - on the current update.
TPV shows all connections available (BLE, ANT, DirectConnect)
if I choose DC, it will connect/pair (and Wahoo App confirms "this device is connected via another app"), but power/cadence data = 0, despite my independently connected power meter (quarq) showing a power value >0.
some infuriating unknown cycle of restarting the app, restarting the computer, restarting the kickr sometimes resolves this (3+ attempts)
I have ensured there are no other BLE connections to the kickr.
I can connect to zwift across any channel (BLE, ANT, DC) just fine.
this all started around…
1 vote -
WORKOUTS: Better ERG mode Spiral-of-Doom recovery
J’ai récemment annulé mon abonnement à TrainerRoad, lorsque j’ai appris que TrainingPeaks permettait de réaliser des entraînements structurés et des sorties virtuelles.
Bien que je n’aie pas encore testé les sorties virtuelles, j’utilise déjà les entraînements structurés de TrainingPeaks. Jusqu’à présent, tout semble correct, voire en tout point similaire à TrainerRoad, à l’exception de quelques petits détails. Le détail qui m’agace actuellement est le suivant :
Durant un entraînement structuré avec intervalles, j’ai voulu tester une situation particulière. En pleine séance d’intervalles, j’ai arrêté de pédaler pendant environ 30 secondes pour simuler la prise d’une gourde ou pour m’essuyer le…1 vote -
UI/UX: General app design
The desktop app looks just awful, looks like there were no graphic designer or UI/UX experts involved at all. It just feels bad to use this app even compared to free competitors.
1 vote -
EXTERNAL: Hevy Integration
Integration with the workout app Hevy, so that all my past workout data and custom workouts can be synced over, and vice versa!
1 vote
- Don't see your idea?