464 results found
-
PAIRING: WattBike cadence support
On the WattBike Trainer (old version of the Air, I think) at the gym the power sensor is read reliably over Bluetooth. However, the cadence sensor is never found. Oddly, TP Virtual does find a couple of cadence sensors for rowers in the gym nearby. Additionally, my Coros watch correctly picks up cadence from the Wattbike. In turn this tells me the scan for cadence is working, and the Wattbike is broadcasting cadence data. It's just that TP Virtual is not picking this up.
4 votes -
EVENTS: Points for Stage Races
To better mimic stage races there should be an option when creating a race as part of a series to have a scratch race which also includes separate points categories for sprint and mountain sprint locations. At present you must make it a points race and there is no differentiation between sprint and mountain points leaving to the organiser to dole out the jerseys.
4 votes -
HUB: An insight into the racing history of at least team members
An insight into the racing history of at least team members
4 votes -
upload to WKO5
Just started with TPV
WKO5 does see the workout, however there is no data and hence not calculated in WKO.
Fields in the workout are saying 'this chart is blank because there is no data in the selected range' - same for all fields.
The 'normal' TP workout there is no issue, so very much related to TPV
Teun Rijke (teunderijke)3 votes -
In Focus Mode, default to a flat windless road.
Feature Request for TrainingPeaks Virtual: When a user selects Focus Mode, the game physics engine should automatically default to a 0% grade (dead flat, windless road) for speed and distance calculations. Currently, Focus Mode hides the 3D world but still applies background map elevation to the physics. This forces ERG-mode riders who want accurate flat-road speed data to manually hunt for flat routes before starting a workout, which is counterintuitive for a minimalist UI mode.
Written by GoogleUI at my direction.
3 votes -
Notify coach result after ramp test
When an athlete completes a ramp test, my understanding is that they can see what their new FTP is and it's updated in TPV, but coaches are not notified of the new FTP, and TrainingPeaks settings are not updated with the new FTP. I would really like these things to happen so I don't have to ask the athlete every time what the result was, and manually update TrainingPeaks settings.
3 votes -
GPX routes - Specifying by Coaches.
I am really impressed with the GPX routes and very happy that athletes can use these without them being setup as an event - this is a good step forward. I am a coach who in particular trains novice racers (often Junior and below) and Awash to make it as easy as possible to use GPX routes as practice races (on a virtual version of their own race). So I would like to be able to 'load' GPX circuits into their schedule for them to be able to ride whenit fits their school/work/social calendar. I can see that they can…
3 votes -
WORLD: Add spectators to side of the roads
Now that TPV added some other object types (hot air ballons, TP HQ, etc) one thing that could also be added is spectators cheering on the side of the road. At least on the finish lines/KOMs or near major intersections.
3 votes -
MECHANICS: Join GPX files together
For quite some time now, I have been toying with the idea of virtually cycling all three climbs of Mont Ventoux in one day.
In principle, completing the route that is necessary in the real world to be accepted into the club Les Cinglés du Mont-Ventoux.
This iconic moutain is very popular without a question, i dare to say.
Climbs of the mountain have be integrated in étapes of the Tour de France more than 15 times.
To date, there are almost 20000 members of the club Les Cinglés du Mont-Ventoux, all having accomplished the above challenge with a certificate.…
3 votes -
EVENTS: Specify Start and End Point for GPX events
Now that we have GPXplore, it would be great to be able to customize the segment of a route that the event will take place on. We can currently set laps or total distance, but all routes start at the beginning of the gpx file. However, if we are preparing for an event, we may only want to use a certain segment of the route. Being able to specify both a starting distance and a total distance would accomplish this and allow users to have one gpx file but choose which portions of it to train on.
3 votes -
PAIRING: Polar H10 and Verity Sense Connection Issues Post Polar Update
Yesterday I updated 2 HRM's polar H10 and Verity Sense to the newest polar firware. I tried to connect the h10 devices to tp virtual - it sees the device but no hr transmitted, tried verity sense - same issue. Last connected 2 days ago no issues. Checked in wahoo head unit / garmin forerunner both see devices and transmit hr. Also it no longer see the forerunner HR. Any issues I can address? thanks
3 votes -
MECHANICS: Making the program more realistic for petite riders
I may be the only one with this issue. I weigh just under 100 lbs. I am just over 5 feet tall. Riding TP is nothing like riding in the real world for me. Zwift did the best job of adapting to a small rider like myself. Maybe I'm outside the bell shaped curve for the physics in the program. It's very frustrating for me to be 20 minutes to 1.5 hours in front of competitors on the road or gravel who are beating me by 5-7 minutes on TP. At least with Zwift, we were within seconds. I can't…
3 votes -
UI/UX: Change camera 1 slightly
Camera 1 goes further back, as we go faster.
Could it also go "higher on descents" and "lower in uphills" ? (otherwise the top HUD hides the riders a few meters in front, up the hill) ?
Maybe the camera could duck down and zoom in if you are aero tucking too3 votes -
HUB: Show ranking changes on TPV hub
Often you don't see ranking changes from an event if you leave before it finishes. Your rank changes can be seen in game, but it would be good if you could see the impact a race has had on your profile in the TPV hub.
3 votes -
WORKOUTS: Start riding immediately
When I'm doing a workout from TrainingPeaks, I don't want to have to reselect all the settings, wait forever for my smart trainer to connect, etc. I should be able to save a profile that I can just click into and start doing the workout.
3 votes -
HUB: Customisable buttons in HUB app
On the Remote tab in the HUB app, it’s quite hard to navigate through the options efficiently using the arrows and enter.
It would be good to be able to choose a few of the most popular in-game buttons to have as a direct button press. Eg - cruise control or join.3 votes -
OTHER: Allow updates to be optional / deferred
There has to be a better way of doing updates. It would be great if the request to downloads of new updates be moved from the start of a session to the end of a session. Zwift does this as well and its a really bad design. If the software update is a large download an you have a slow connection, you can be blocked from starting your cycle session for quite some time or even miss a scheduled race which is worse. I would like to a option/warning at the end of my session to do the update now…
3 votes -
PAIRING: External Camera to determine rider position for CdA
Using external cameras (like webcams) and machine learning to determine the rider's actual riding position (on the drops, hoods, top, standing, seated, etc.) to change the virtual avatar riding position and also their CdA.
3 votes -
UI/UX: Improve AppleTV virtual gear control
Please map the AppleTV remotes +/- buttons to increase / decrease power (in ERG or cruise control) and increase / decrease virtual gear (all other modes). This would be an incredibly useful shortcut. Reasons why all other solutions are not meeting my demand:
- Navigating the Menu to increase / decrease difficulty is very cumbersome and takes time, also when doing it with the virtual remote of TPvirtual Hub
- adding game controllers is not possible on AppleTV as no USB port is available and only two Bluetooth connections can be made which are needed for the trainer, power meter…3 votes -
UI/UX: Show positioning arrows when primary dashboard not shown
To be clear: not the route selection arrows, but the arrow that show if you have chosen to move the bike to the left or right of the road/group. The positioning arrows.
Use case: The zones provide really good information and I find that I don’t need the dashboard if I have them up, and this also frees up some screen real estate. But I do want to see the positioning arrows. Could they be separated from the dashboard and made a distinct item?
3 votes
- Don't see your idea?