451 results found
-
PAIRING: Auto-Pairing should use BLE UUID
Dear TrainingPeaks Team,
we are writing to report a reproducible and blocking issue with TrainingPeaks Virtual on Apple TV, which significantly impacts our real-world usage.
Real-world setup:
- 2 people training at the same time
- in the same room
- using 2 different trainers (Elite Suito-T, different serial numbers) on 2 separate Apple TVs with 2 separate instances of TrainingPeaks Virtual
Issue:
TrainingPeaks Virtual does not persistently store the associated trainer on Apple TV.
At every app restart, the app performs a fresh Bluetooth scan and connects randomly to one of the available Elite Suito-T trainers, ignoring the trainer selected in the…1 vote -
PAIRING: Support incline data in ERG mode
When I ride in TPV not in a workout/ERG mode, my smart trainer (Tacx Neo 2T) and incline device (Tacx Alpine) accurately adjust to changes in incline. However, when I’m riding in a workout in ERG mode, the incline stays at zero percent the entire time. By contrast, when I ride in other apps, e.g., Zwift, in ERG mode I still get the changes in incline as I ride across varied terrain.
This is frustrating as I don't get to train the changes in muscle position that I otherwise would. It doesn't match with the way TPV presents itself with…
1 vote -
UI/UX: Change the text of "Warm up/Cool Down" from zwo files to "Ramp up/Ramp Down"
It more a cosmetic change, but ramps can occur in the middle of a workout and "warm up/cool down" doesn't make sense in those instances. "Ramp up/down" would work even for the first/last blocks
1 vote -
PAIRING: Wahoo Kickr / TPV (BLE, DC) can't pair
Win10 system, Wahoo Kickr - on the current update.
TPV shows all connections available (BLE, ANT, DirectConnect)
if I choose DC, it will connect/pair (and Wahoo App confirms "this device is connected via another app"), but power/cadence data = 0, despite my independently connected power meter (quarq) showing a power value >0.
some infuriating unknown cycle of restarting the app, restarting the computer, restarting the kickr sometimes resolves this (3+ attempts)
I have ensured there are no other BLE connections to the kickr.
I can connect to zwift across any channel (BLE, ANT, DC) just fine.
this all started around…
1 vote -
WORKOUTS: Better ERG mode Spiral-of-Doom recovery
J’ai récemment annulé mon abonnement à TrainerRoad, lorsque j’ai appris que TrainingPeaks permettait de réaliser des entraînements structurés et des sorties virtuelles.
Bien que je n’aie pas encore testé les sorties virtuelles, j’utilise déjà les entraînements structurés de TrainingPeaks. Jusqu’à présent, tout semble correct, voire en tout point similaire à TrainerRoad, à l’exception de quelques petits détails. Le détail qui m’agace actuellement est le suivant :
Durant un entraînement structuré avec intervalles, j’ai voulu tester une situation particulière. En pleine séance d’intervalles, j’ai arrêté de pédaler pendant environ 30 secondes pour simuler la prise d’une gourde ou pour m’essuyer le…1 vote -
UI/UX: General app design
The desktop app looks just awful, looks like there were no graphic designer or UI/UX experts involved at all. It just feels bad to use this app even compared to free competitors.
1 vote -
EXTERNAL: Hevy Integration
Integration with the workout app Hevy, so that all my past workout data and custom workouts can be synced over, and vice versa!
1 vote -
MECHANICS: Power from heart rate data.
My exercise bike shows power values but does not broadcast them. So I can't currently use TrainingPeaks Virtual for my training. I have instead been using TrainerDay because it allows me to do power based workouts as long as I am sending live heart rate data from my heart rate chest strap. It would be great if TrainingPeaks Virtual would allow for this as well!
1 vote -
UI/UX: Showing ALL virtual rides on a map
Showing ALL virtual rides on a map would be very helpful for documenting virtual rides :-)
1 vote -
WORKOUTS: Difficulty scaling Minimum
When using the erg mode we have the difficulty scaling setting. The problem is it scale everything so if the easy is at 50% and you set the difficulty scaling at 90% the 50% will become 45%. I wish there was a setting that prevent going below a specific value and only scale value above that specified value. Even when feeling really good you bump it up at 110% you don't want it to scale your easy at 55% but remain at 50%.
1 vote -
EXTERNAL: Ability to export data to 3rd parties
Eine direkte Übertragung der Trainingsdaten auf die gängigsten Plattformen wie z.B. Suunto, Sigma, Hammerhead, Wahoo, Garmin usw.
1 vote -
HUB: Set TPVirtual weight while in TPHub
When I weigh myself in the morning, I wish I could easily update my weight in TPV right there. Instead, I have to hope I remember to change it later on when I open my iPad to TPV. I have the Hub on my phone, but not TPV, so I think it'd be beneficial to update weight in Hub.
1 vote -
UI/UX: Virtual gear hotkeys
Treadmill style “quick buttons” for virtual gear #.
I love the virtual gear feature but when utilizing for fast-changing intervals… I find the +/- to be slow when I want to go from ~5 to ~17.To keep from a cluttered UI, give a sliding range of ~10 buttons or something.
Ex: if in virtual gear 10… on screen would be 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15. Of course this would be able to be shown/removed from users’ UI settings.
Maybe too niche but I’d enjoy it for non-erg intervals!1 vote -
EVENTS: Specify Start and End Point for GPX events
Now that we have GPXplore, it would be great to be able to customize the segment of a route that the event will take place on. We can currently set laps or total distance, but all routes start at the beginning of the gpx file. However, if we are preparing for an event, we may only want to use a certain segment of the route. Being able to specify both a starting distance and a total distance would accomplish this and allow users to have one gpx file but choose which portions of it to train on.
1 vote -
UI/UX: Easy way to test custom jerseys & brandings
An area for uploading and previewing race brandings and team jerseys would be great. Currently it takes around 1 week to get a new branding approved without the possibility to get a preview.
For me I can do a workaround with Blender, but not everybody has these abilities.1 vote -
UI/UX: Exclude zero from averages
Please add an option to exclude zero values from cadence and power averages. You can do this on most bike computers, it would be nice to have it on screen too. Basically, if you coast, your averages sink and then you are left chasing the targets the rest of your interval, which is reality, but there are also benefits to being able to exclude the zeros in the averages shown.
1 vote -
HUB: Double Chat Messages
The mobile app for iOS, when you enter a chat message it sends 2 messages in the game (duplicates). Seems a bug?
1 vote -
MECHANICS: Default route for all workout rides
It would be convenient if we could set a default route for workout rides. As an example, being able to select a relatively flat route to be used for all steady-state type of rides. Or simply to be able to select one specific route to be used for ALL workout rides.
1 vote -
PAIRING: Kickr snap bug?
I use TPV on my laptop. Two weeks ago, I explored routes and scheduled a challenge, closed my laptop (but left TPV open), then went downstairs to start the workout. When I reopened, it seemed like everything connected correctly. But when I entered the pen, TPV couldn’t read any wattage from my KickR. I closed TPV and reopened the app, which reconnected.
Could be weird to replicate, but I hope it helps.
1 vote -
UI/UX: Metronome with audio/visual beats for workouts
Can you add a metronome with preselected features, audio and visual beats in the dashboard for planned workouts sync?
1 vote
- Don't see your idea?