451 results found
-
In Focus Mode, default to a flat windless road.
Feature Request for TrainingPeaks Virtual: When a user selects Focus Mode, the game physics engine should automatically default to a 0% grade (dead flat, windless road) for speed and distance calculations. Currently, Focus Mode hides the 3D world but still applies background map elevation to the physics. This forces ERG-mode riders who want accurate flat-road speed data to manually hunt for flat routes before starting a workout, which is counterintuitive for a minimalist UI mode.
Written by GoogleUI at my direction.
1 vote -
CORE Sensor Metrics
Add the Metrics available in the CORE Sensor app to the daily TrainingPeaks Metrics:
Heat Adaption Score, Heat Training Load, Time in Heat Zones, Heat Strain
This would allow for better coach control over heat training protocols solely within the TP system.
1 vote -
Make Shifting Noticeable
While riding on TPV, I change gears with NO noticeable effect for about 30 seconds. This is not an expected behavior. On other platforms, I get about the same effect as in real life. There’s. a slight bump up in effort which levels off in several seconds. Same with downshifting, as effort decreases and then slightly increases in less than a couple of seconds.
1 vote -
Identify Heart rate monitor
It would be nice to only see recognised trainers, heart rate and power meters. I warm up at the midweek TT on TPV but so do lots of others so I see numerous heart rate and power meters making it difficult to connect the right one.
1 vote -
OTHER: iOS battery drains while sleeping
I've found that when I forget to force close this app after a ride, my iPad will completely drain of battery in a few hours even while asleep. I could understand if the device was open and the app was running, but it happens when the device is totally at rest.
It's kind of weird to me, because I've seen that if I ever have to minimize the app and use another one (like looking something up in a web browser), TPV will almost always totally close out and end my ride.
1 vote -
UI/UX: Display dFRC
This has been proposed as a W' gauge, but since I know TP is thinking of importing the dFRC chart from wko5 to TP online, it would be great if that could also be translated into a metric (imperfect though it may be) to track on TPv. Sauce for Zwift has had one for years as a gauge, so I imagine it wouldn't be too difficult to implement in some fashion. One easy improvement on the Sauce model would be to allow the user to set their FRC/W' rather than defaulting to 20 kJ.
1 vote -
PAIRING: Wahoo KICKR bike buttons for U-Turns
Please enable u-turns using the right-hand back button on the Wahoo KICKR bike in all TPV training modes.
At present the button does not cause a u-turn while free-riding.
1 vote -
WORKOUTS: FTP Test Issue
Today I have done the FTP test, The 20’ all out effort isn’t structured properly. I had issues with the power distribution and cadence. The two were not properly correlated. I’m sure there is something to do to improve. I was using the wahoo kickr core as trainer
1 vote -
PAIRING: Add support for the Movesense MD ECG sensor on TPV
The number one cause of sudden death in athletes 35+ yo is cardiovascular. Besides that, AFib is the leading arrhythmia in endurance athletes. Let's improve TrainingPeaks Virtual, TrainingPeaks, and WKO5 by integrating real-time ECG plotting and post-session review capabilities with the Movesense MD sensor. This feature would allow athletes, coaches, and sports medicine physicians to gain a deeper understanding of their cardiovascular system during long exercise sessions.
1 vote -
MECHANICS: Public viewable effort gauge improvements
The effort gauge needs overhauled to make visual efforts consistent among riders in the same group \ pacing level.
TrainingPeaks Virtual pacer bots and effort indicators are designed to work as follows:
*Personalization of Pacebot Effort: Each pacer bot (like Oli Obsidian or Cyril Citrine) is intended to deliver a pacing experience that is tailored to you personally. The system factors in your user profile, especially your current weight and the specifics of the route (such as hills versus flats), to calculate how much power you’ll need to keep up with each bot. Heavier riders, for example, will need more…1 vote -
EXTERNAL: Training load, TSS, ATL, CTL, etc doubled when pair with Garmin Connect
When TP is connected to Garmin Connect and doing a ride where the ride is saved via TPV and from a Garmin device, the ride's stats get doubled. This is due to the data being saved from TPV and then pulled down again from Garmin Connect.
TP should be smart enough to pull the most complete (data accurate) version of the same ride. This is what's done with Garmin Connect.
When riding outside, I'll track the ride with a Garmin Edge 1050 and a Fenix 8 pro. When both devices sync, Garmin is smart enough to use the most accurate…
1 vote -
MECHANICS: Pacebots are not available in Zen mode
Pacebots are not available in Zen mode. This is due to how zen mode was implemented in that you don't see other riders, but other rides technically still see you (no name).
Pacebots need added in for riders in zen mode who want pushed.
1 vote -
MECHANICS: New bike type: fixie \ single speed
There should be a new bike type that can be selected in TPV for those of us that ride fixie or single speed.
Be nice for a UI option for single speed mode to prevent\ignore shifting. This would help others realize why a rider's cadence maybe very high or low compared to other near by riders or those in a group.
1 vote -
UI/UX: Show full (not truncated) workout title
I really hate that I can't see the full workout title (in both, mobile and desktop) and I need to click on "edit" to be able to read it.
Just display it fully in multiple lines if needed, I have no idea why it was put as "one line".
My workout titles are often longer and have some important info added in the end (and later in description), but why truncating the title???1 vote -
UI/UX: Visual indication (UI) that HUDs are hidden.
Visual indication (UI) that HUDs are hidden ←Please add.
"h" toggles all HUDs displayed/hidden.
There is no on-screen control for this. There is no setting for this, afaict. There is no indication, visual or otherwise, that all HUD’s are toggled off. This is barely mentioned in the documentation. It does not come up when searching for, e.g.: “TrainingPeaks Virtual HUDs not showing”. Google’s robotic donkeys braying from distant hilltops (so-called “AI”) does not mention this shortcut.
The shortcut is useful. The documentation less so, and the UI not at all. Please somehow promote this information in the documentation, add a…
1 vote -
MECHANICS: Team outfit automatic equipment for team members.
There is a bug still unresolved.
The members of my team are not automatically equipped with the team outfit.
If they equip themselves with the outfit and leave TPV while saving, they are still not equipped by default with the correct outfit when they reconnect.
When I was a member of IndieVelo, it worked perfectly... that’s no longer the case today!
It is necessary that this bug be corrected as soon as possible!Thank you in advance for your feedback on this subject.
1 vote -
WORKOUTS: More than a 2 step repeat in TPV
Is it possible to get more than a 2 step repeat , yes there is 3 and you can add intervals however it doesn't group them together. What happens is the whole left side of my monitor gets filled up with intervals. Its kinda depressing because itll say you have 50 more to go and I have to correct myself say no I only have 10 more to go.
1 vote -
UI/UX: Present the rubber band strength on screen.
Show the band strength on screen as a metric.
1 vote -
FIT FILES: Add option to always record power from powermeter in the .fit file
When there are two power sources (trainer and powermeter), the "power" field of the .fit file always contains the power source that was used to make your avatar move in game. The other power source is saved in a custom data field.
I would like an option to always save the preferred power source in the "power" field of the .fit file, even when the game effectively uses the power from the trainer to make the avatar move. In this case the power from the "non-preferred" source would be saved to a custom field.
The problem with the way the…
1 vote -
UI/UX: Dashboard shows power from trainer twice
When the "Powermeter Preferred" option is selected and you enter a race that enforces power from the trainer, the UI displays the power from the trainer twice: once in the primary dashboard as expected ("Power Current" data field), but also in the secondary dashboard ("Power Secondary" data field).
See the attached screenshot. This is with the default dashboard settings.
Instead, the "Power Secondary" data field should always display the power source that is not already displayed in the "Power Current" data field.
1 vote
- Don't see your idea?