468 results found
-
PAIRING: Auto-Pairing should use BLE UUID
Dear TrainingPeaks Team,
we are writing to report a reproducible and blocking issue with TrainingPeaks Virtual on Apple TV, which significantly impacts our real-world usage.
Real-world setup:
- 2 people training at the same time
- in the same room
- using 2 different trainers (Elite Suito-T, different serial numbers) on 2 separate Apple TVs with 2 separate instances of TrainingPeaks Virtual
Issue:
TrainingPeaks Virtual does not persistently store the associated trainer on Apple TV.
At every app restart, the app performs a fresh Bluetooth scan and connects randomly to one of the available Elite Suito-T trainers, ignoring the trainer selected in the…1 vote -
PAIRING: Support incline data in ERG mode
When I ride in TPV not in a workout/ERG mode, my smart trainer (Tacx Neo 2T) and incline device (Tacx Alpine) accurately adjust to changes in incline. However, when I’m riding in a workout in ERG mode, the incline stays at zero percent the entire time. By contrast, when I ride in other apps, e.g., Zwift, in ERG mode I still get the changes in incline as I ride across varied terrain.
This is frustrating as I don't get to train the changes in muscle position that I otherwise would. It doesn't match with the way TPV presents itself with…
1 vote -
UI/UX: Camera 3 viewpoint
Raise the focal point of camera 3 view.
At the moment, when another riders is along side, their shoulders are at the top of the screen which would mean our head is level with their stomach.
Please can the view point so that the shoulders of the rider alongside are middle of our view (vertically speaking).
The offset option in setting does not achieve the above desired result.4 votes -
UI/UX: Change the text of "Warm up/Cool Down" from zwo files to "Ramp up/Ramp Down"
It more a cosmetic change, but ramps can occur in the middle of a workout and "warm up/cool down" doesn't make sense in those instances. "Ramp up/down" would work even for the first/last blocks
1 vote -
DATA STREAM FAIL: Wahoo Kickr / TPV (BLE, DC)
Win10 system, Wahoo Kickr - on the current update.
TPV shows all connections available (BLE, ANT, DirectConnect)
if I choose DC, it will connect/pair (and Wahoo App confirms "this device is connected via another app"), but power/cadence data = 0, despite my independently connected power meter (quarq) showing a power value >0.
some infuriating unknown cycle of restarting the app, restarting the computer, restarting the kickr sometimes resolves this (3+ attempts)
I have ensured there are no other BLE connections to the kickr.
I can connect to zwift across any channel (BLE, ANT, DC) just fine.
this all started around…
1 vote -
Trainingpeaks Vs TrainerROAD
J’ai récemment annulé mon abonnement à TrainerRoad, lorsque j’ai appris que TrainingPeaks permettait de réaliser des entraînements structurés et des sorties virtuelles.
Bien que je n’aie pas encore testé les sorties virtuelles, j’utilise déjà les entraînements structurés de TrainingPeaks. Jusqu’à présent, tout semble correct, voire en tout point similaire à TrainerRoad, à l’exception de quelques petits détails. Le détail qui m’agace actuellement est le suivant :
Durant un entraînement structuré avec intervalles, j’ai voulu tester une situation particulière. En pleine séance d’intervalles, j’ai arrêté de pédaler pendant environ 30 secondes pour simuler la prise d’une gourde ou pour m’essuyer le…1 vote -
PLATFORMS: Chromebook
J’utilise TrainingPeaks depuis plusieurs années (12 ans). Auparavant, j’utilisais beaucoup un PC portable, mais maintenant que je suis lassé de la plateforme Windows, je me tourne vers Chrome OS. Je me demandais quel serait le Chromebook recommandé pour utiliser la plateforme TrainingPeaks, autant pour mes entraînements structurés que pour mes sorties virtuelles.
2 votes -
UI/UX: General app design
The desktop app looks just awful, looks like there were no graphic designer or UI/UX experts involved at all. It just feels bad to use this app even compared to free competitors.
1 vote -
EXTERNAL: Hevy Integration
Integration with the workout app Hevy, so that all my past workout data and custom workouts can be synced over, and vice versa!
1 vote -
MECHANICS: Join GPX files together
For quite some time now, I have been toying with the idea of virtually cycling all three climbs of Mont Ventoux in one day.
In principle, completing the route that is necessary in the real world to be accepted into the club Les Cinglés du Mont-Ventoux.
This iconic moutain is very popular without a question, i dare to say.
Climbs of the mountain have be integrated in étapes of the Tour de France more than 15 times.
To date, there are almost 20000 members of the club Les Cinglés du Mont-Ventoux, all having accomplished the above challenge with a certificate.…
3 votes -
MECHANICS: Power from heart rate data.
My exercise bike shows power values but does not broadcast them. So I can't currently use TrainingPeaks Virtual for my training. I have instead been using TrainerDay because it allows me to do power based workouts as long as I am sending live heart rate data from my heart rate chest strap. It would be great if TrainingPeaks Virtual would allow for this as well!
1 vote -
UI/UX: Showing ALL virtual rides on a map
Showing ALL virtual rides on a map would be very helpful for documenting virtual rides :-)
1 vote -
WORKOUTS: Difficulty scaling Minimum
When using the erg mode we have the difficulty scaling setting. The problem is it scale everything so if the easy is at 50% and you set the difficulty scaling at 90% the 50% will become 45%. I wish there was a setting that prevent going below a specific value and only scale value above that specified value. Even when feeling really good you bump it up at 110% you don't want it to scale your easy at 55% but remain at 50%.
1 vote -
WORLD: Hidden Routes
Harking back to early PC video games, I'd love hidden routes or short cuts in the open world. These could be unlocked by entering a sequence at a specific time on a route (e.g., near the chalets, you enter left, left, right, right, left and turn abruptly onto said off-road trail and discover something new.
Honestly, if it takes, you'd have folks touring around the world searching for these. It could also integrate easily with Zwift Play or any other cycling controller.
From there, you could make it ok in informal group rides to take short cuts. This might be…
2 votes -
Übertrage von Daten am Tachos usw.
Eine direkte Übertragung der Trainingsdaten auf die gängigsten Plattformen wie z.B. Suunto, Sigma, Hammerhead, Wahoo, Garmin usw.
1 vote -
Garmin workouts on platform
Being able to have Garmin workouts being loaded for rides onto the TPV. This would allow for training plans from the likes of TrainerRoad to be used which currently only work on Z.
1 vote -
HUB: Set TPVirtual weight while in TPHub
When I weigh myself in the morning, I wish I could easily update my weight in TPV right there. Instead, I have to hope I remember to change it later on when I open my iPad to TPV. I have the Hub on my phone, but not TPV, so I think it'd be beneficial to update weight in Hub.
1 vote -
UI/UX: Virtual gear hotkeys
Treadmill style “quick buttons” for virtual gear #.
I love the virtual gear feature but when utilizing for fast-changing intervals… I find the +/- to be slow when I want to go from ~5 to ~17.To keep from a cluttered UI, give a sliding range of ~10 buttons or something.
Ex: if in virtual gear 10… on screen would be 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15. Of course this would be able to be shown/removed from users’ UI settings.
Maybe too niche but I’d enjoy it for non-erg intervals!1 vote -
EVENTS: Specify Start and End Point for GPX events
Now that we have GPXplore, it would be great to be able to customize the segment of a route that the event will take place on. We can currently set laps or total distance, but all routes start at the beginning of the gpx file. However, if we are preparing for an event, we may only want to use a certain segment of the route. Being able to specify both a starting distance and a total distance would accomplish this and allow users to have one gpx file but choose which portions of it to train on.
1 vote -
polar H10 and Verity Sense Connection Issues Post Polar Update
Yesterday I updated 2 HRM's polar H10 and Verity Sense to the newest polar firware. I tried to connect the h10 devices to tp virtual - it sees the device but no hr transmitted, tried verity sense - same issue. Last connected 2 days ago no issues. Checked in wahoo head unit / garmin forerunner both see devices and transmit hr. Also it no longer see the forerunner HR. Any issues I can address? thanks
3 votes
- Don't see your idea?