147 results found
-
Pre-activity comments missing from Exportable metrics
Pre-activity comments data is missing when exporting raw data in CSV format.
My coach writes in details in the pre-activity comments, which is quite helpful when reading them later. I want to capture everything to play with what TP offers.1 vote -
Be able to compute PA:HR if power data is available (Heart Rate Drift)
If in your training data power is available, you can only calculate Pw:Hr. It is annoying to alter your training data and delete the power data to calculate Pa:Hr. It would be super nice if you could just select the calculated variant with a dropdown of Pw:Hr and Pa:Hr, for example. This would make Heart Rate Drift much more convenient to calculate.
This hit me after the new updates by Garmin, your watch delivers Power with a Garmin strap, and you cannot really turn that off.
16 votes -
Better estimate of impact of Rowing Workouts
Rowing workouts should reflect actual work done & impact on fitness/form
Rowing workout 9/22:
3x20 min zone 3+ (10 min zone 3; 50 min zone 4) only computed 19 TSS / 0.42 IF.Bike workout prior week 9/15:
2x20 Z3 on the bike - 62 TSS, 0.74 IFAt a bare minimum, the rowing workout should be 1.5x the bike effort (3 intervals vs 2); plus it was almost all Z4, so should be higher again impact.
First time I've uploaded rowing data and it appears that TP is just using wattage/effort data from the bike?
11 votes -
Better visualization of multisport workouts
For a triathlon, there are 5 workouts uploaded to the calendar (Swim, T1, Bike, T2, Run). I could cope with that. But when it comes to swimrun, workouts with 15 runs and 14 swims are normal. This bloats the calendar.
I want TP to be able to show this as one event but when i go into the details of the workout, all workouts that makes up this multisport event are listed. Garmin Connect handles this in a neat way.
13 votes -
Support visibility into SRAM eTap shifting data
SRAM eTap tracks shifting data and I can see that data on my Garmin Edge 1030 but that doesn't get surfaced up into my TP workouts. I know this data is in the SRAM AXS portal also. Perhaps by building a connection to that partner the data could be mapped in?
2 votes -
1 vote
-
Garmin Ultra "Aid Station" or non-moving time
The Garmin Ultra activity auto-logs our non-moving time. Presumably our aid station time. It would be helpful if that could show up in TP. Either on a per lap basis or at least the cumulative amount for the activity.
3 votes -
Muscular Fatique
As endurance beginner I often experience a gap between the prediction of form and my true capability of working out.
I sometimes wasn‘t able to do group rides I wanted because activities added up different from prediction of Form.
I figured out that there are muscular stress factors which overweight the overall stress score - like sore muscles after a little too hard strengh training. Or when you did even a single interval which was way beyond the sweet spot.
So I would love to see a number muscular Stress which is measured separately. The IF woukd play a bigger…
1 vote -
Year over year or custom period overlay for comparison.
While preparing for an event, it would be nice to overlay previous period to compare progress. Like, what do these 16 weeks look like, compared to another “similar period” last year. Especially interesting if you reuse an old training plan.
7 votes -
Heart rate zones based on lab-based lactic acid threshold test
Having completed a lactic acid threshold test I would appreciate the option to set the heart rate for 2mmol/L, the heart rate for 4mmol/L, max heart rate and resting heart rate.
I may be in the minority, but have found that entering either of these heart rate thresholds as well as my max and resting heart rate have not yielded reasonable results for the Zone calculation. I ended up having to play around with the threshold until I arrived at reasonable zones.
Alternatively/in addition, links to the source material of how the wealth of methods calculate threshold would be helpful…21 votes -
12 votes
-
ramp rate needs units specified
I like the "Ramp Rate (RR)" metrics on the dashboard but not sure the data is as helpful (unambiguous) as it could be. The ramp rate is quoted in CTL per number of days. But the RR, as discussed in Joe F's Blog (linked on the home page), gives targets in CTL/week, which is a number that is more meaningful. Could your metrics be displayed in CTL/week to make it easier to understand/use? A bare number without the units specified is ambiguous.
1 vote -
Add Distance Peaks
I would like to add Peaks on Cycling at 20 Km 30 Km 40 Km 50 Km
60 Km 75 Km 100 Km 120 Km 150 Km 200 Km3 votes -
Median Heart Rate
Hi, it is possible to add the ability to select median heart rate rather than average? If there are enough outliers in the data, it will skew the results. As an example, I just completed an hour run. My heart rate settled in to a range of 130-132 for most of the run but since there was a ramp in the beginning and at the end, they were included and it skewed the average down. I have also seen this have a larger impact on treadmill runs where I had to stop momentarily to start another session since I exceeded…
9 votes -
Add rolling average options to [metrics] charts
Due to displaying multiple scales on the same chart and that the data is fairly well-bounded, the plots of metrics feels very "choppy." It'd be nice to have an option to display data in a rolling average form to smooth it out. Businesses already do this for displaying YoY data for the same reason. See attached screenshot as an example.
5 votes -
Validate/Sanity Check Peak Performances
For Peak Performances, if I set a new record that's greater than 25% more than my previous, I feel it should ask me to confirm if it's valid. Or at least some checks that I'm not running faster than Usain Bolt's 100m mph for a full mile, or swimming faster than Michael Phelps or biking faster than Lance Armstrong, etc... For those of us that live in a city and the buildings the GPS can be inaccurate and cause wildly incorrect times and an upper bound would be quite useful.
9 votes -
Effort kilometers
I am a coach of trailrunners and It would be so useful for me, for other coaches and for athletes to include effort kilometers as a volume field and effort kilometers/hour as a quality value. Furthermore it could be really interesting to have the relative charts in the athlete dashboard.
1 vote -
Compliance Chart availability to Coaches
Adding the compliance pie chart and statistics which the athlete can view via the weekly snapshot, to the coaches view via the charts library
1 vote -
Include recovery and strain scores from Whoop as a metric to be tracked on the metrics panel of the dashboard.
Include recovery and strain scores from Whoop as a metric to be tracked on the metrics panel of the dashboard.
38 votes -
Include temperature to the snchronized metrics from Withings
I have been tracking blood pressure and weight with the help of Withings devices for some time now. Both are synchronized from Withings to Training Peaks.
Recently I've added body temperature to the metrics I track with Withings; however there is no body temperature field in TP metrics for me to enter them, and oviously it is also not being synchronized.
Would be great if this field could be added, and an import from withings implemented.
13 votes
- Don't see your idea?