444 results found
-
PAIRING: powertap p2 - can only use 1 pedal?
I have dual power pedals, Powertap P2, with both sides generating power data. It sees both pedals, but I can only select one of them. Therefore, my power is cut in half. There doesn't seem to be an option to use two sided pedals. Garmin and other apps read it just fine, including Zwift.
3 votes -
WORKOUTS: allow workout builder ramps; negative splits & positive fades
Love that the TPv seems to take the Warm up and Cooldown blocks from workout builder and ramp from low to high or high to low respectively.
Can there be a way to add this type of Active interval block that is a ramp up or ramp down from workout builder? This would allow hard start vo2 intervals and even more real-world short anaerobic where power often fades after a peak is hit.
6 votes -
UI/UX: Distance of riders behind is not visible
The distance of riders behind, especially the pace rider, is not visible, but hidden behind the effort/elevation chart on the bottom of the screen, once it reaches a certain distance, probably about 10 meters or so.
It's pretty annoying. Mostly you want to check the distance when you got to the front of the group and make sure you're not too far.5 votes -
PAIRING: How do I escalate a support issue?
I have been going back and forth with customer support, attempting to solve an Issue with using my Macbook with either ANT+ or Ethernet connection with TPV. I have pointed out SEVERAL times that the setup works perfectrly with ZWIFT and has worked for 2 years. I have not received ANY helpful information or assistance, and have asked to escalate the issue. I have been ignored. Instead I have received tips like the following:
"To use direct connect, you should run an ethernet cable between your trainer and router, and then just use an ordinary wifi connection between your computer…
8 votes -
PAIRING: Bug during workout ride (ERG failure)
I had to log in and log out 4-5 times today before I could do my planned workout ride. The first several attempts there appeared to be a glitch with ERG mode. Power would not follow the workout rides target power ... it stayed way lower, regardless of my gearing or how hard I pedaled. On the 5th attempt, everything worked normally, and worked good through the entire ride?
2 votesMany thanks for letting us know about this, and your support for TrainingPeaks Virtual.
Please can you send your log files to virtual@trainingpeaks.com and we can take a look at what is happening under the covers and how best to fix this for you.
-
UI/UX: hover over hints for what each number represents
in the main screen, I see that below the live data, there are 3 different numbers for Power, HR, and Cadence. I would love to know what each number is. I know it's something to do with averages, maximums, and minimums, but I cannot find documentation on exactly what they are.
5 votesMany thanks for your suggestion and support for TrainingPeaks Virtual.
Improving the UI is firmly on our to-do list, and using tool-tips is a great suggestion. In the mean-time, the 2 values shown for cadence and heartrate are the average and maximum, and the 3 values shown for power are the average, normalized and maximum values.
-
WORKOUTS: FTP Test 20 min glitch?
I tried the riding the FTP test (20 min) today and when it got to the free ride and turned off the ERG, I essentially could only free spin and could not apply any watts for the test. I ended the workout and tried to go back to the Terrain mode, but at that point my watts were stuck at a fixed 130 watts and it would not adapt to the Terrain mode again. I ended up stopping the ride all together and starting a new free ride where I was able to ride the Terrain once again. Was this…
4 votesMany thanks for letting us know about this, and your support for TrainingPeaks Virtual.
Please can you send your log files to virtual@trainingpeaks.com and we can take a look at what is happening under the covers and how best to fix this for you.
-
PAIRING: recover from sleep / power down - fails to connect to bluetooth devices
Sometimes if my laptop goes into sleep or runs out of power mid workout, it never then reconnects to the trainer - in pairing, it "looks" like it is connected, and you can even unpair and repair - but it gets no data.... I have to QUIT training peaks and restart before it reconnects - which is not good when I am mid workout.
2 votes -
FITFILES: Stop Virtual from auto-saving to TP account.
After a ride Virtual asks me if I want to discard the ride (I assume to stop it syncing to my TP account) but it ignores me and auto-saves to TP anyway. Then when a sync my watch to Garmin Connect (which is linked to TP) I have two workouts in my account for the one ride. It's easy enough to delete one but my TP account is also linked to WKO as well. The discard my ride button is ignoring me.
35 votes -
UI/UX: Aufnahme von Hf maximal und TF in die Rundenübersicht
Aufnahme von Hf maximal und TF in die Rundenübersicht.
0 votes -
OTHER: Bug - Won't shutdown
Loving the experience so far, it's great to be on the journey with you to make this a brilliant product. I'm already invested in this as I've ditched Trainer Road as it's not needed now to do my indoor sessions.
Anyway. I have a bug that's been about for a while where when I close the program it just hangs, continues to play the music yet doesnt do a thing. I then have to go to task manager and kill the process. How do I send you the log files?
Also, noticed on Saturday that riders wheels were 'buried' about…2 votesThank you for letting us know about this issue, and your support for TrainingPeaks Virtual.
Can you please send your log files to virtual@trainingpeaks.com and we can take a look and try to understand what might be happening here, and how best to fix this for you.
-
EXTERNAL: Fascat integration
Would be great if we could download Fascat workouts into the custom workout folder.
3 votes -
WORKOUTS: MAP Test for TP Premium Subscribers
Develop and include an easy to use Maximum Aerobic Power (MAP) Test for TP Premium subscribers to test themselves where intervals are 2min 30sec each and increase 25 watts each time. It should be developed such that users can choose/click “MAP Test”, do the test, including a built-in Warmup/Cooldown interval, and then be presented with their results once the test is completed. TP can then store a history of the MAP Tests or users can download a .pdf file to keep a history of them.
9 votes -
UI/UX: Ability to scroll through chats so you can go back though any advice or help
Ability to scroll through chats so you can go back though any advice or help
2 votes -
PAIRING: Pair both Wahoo Kickr and Garmin Watch
It would be helpful to pair my Garmin watch and Wahoo Kickr at the same time. I get my heart rate from my Garmin watch which won't pair with TPV so at the moment I'm recording 2 rides - one on my watch and one via TPV and then manually consolidating into one ride
9 votes -
PAIRING: Wattbike Proton
Wattbike Atom displays the current gear next to the virtual head in the HUD but the Wattbike Proton does not. Please implement this as it makes the user experience much better.
Thanks
Matt4 votes -
FITFILES: Send email with completed activity and fit file
It would be great to receive a email per completed activity with the fit file and details about the activity. Yesterday there where sync issues between TPV and TP. And on apple tv there seams to be no way to resync or send a completed workout if there are sync issues.
7 votes -
UI/UX: Allow user to turn off auto-pause
TPVirtual seems to auto-pause if I stop pedaling during a workout. I do pre-set workouts concurrently with other teammates so I’d like the workout to keep going even if I pause my pedaling momentarily. I'd like a setting that I can change so that the workout continues independent of if I am actively pedaling.
3 votes -
FITFILES: Warning if ride is not being recorded
I've lost data of a couple of rides now. It's very frustrating when everything looks fine during a workout only to discover once you are done that all the work you did wasn't recorded.
A warning about i.e. server connection issues would let me take action and restart the app.14 votes -
EVENTS: Custom Directeur Sportif View
I think it would be sweet to allow the designated team’s DS to have a custom (and customizable) view when spectating a race.
Something that allows the DS to see their riders details on their screen so they can know the status of their team.
Things like speed and location, among many others, but also things like W’Bal, HR, Distance behind next place, split screen option to view multiple riders at once, etc etc etc
4 votes
- Don't see your idea?