1397 results found
-
Set the Gear Ratio for each Bike+Wheelset
Request -Add a way to add the actual gears for the bike into TrainingPeaks (probably associated with a bike + wheel combination)?
Currently the Beta Charts include a "Front Gear" and "Rear Gear". These seem to be on the way to becoming the Front and Rear gearing. It would be great to be able to assign to Bike and separate Wheel combination - sometimes training with disc wheel that has different cassette to non-disc wheel.
Bonus - have the option to have a single chart with gear ratio (rather than two charts). This will simplify the number of charts required…
2 votes -
Event categories
Under event have an age category of 50 to 54. In the NATIONAL SR. OLYMPICS IN THE US THEY HAVE CATEGORIES THAT STARTED AT 50-54, 55?to 59. You can see further looking at NSGA.com
Also
Plz have “TT”. TIME TRIAL events available under race category
Thanks2 votes -
Make the "Search workouts" function available on phones/tablets
The desktop version supports searching for workouts (the magnifier symbol right next to the refresh symbol). It would be convenient if it were available in the mobile version of TrainingPeaks on phones and tablets.
2 votes -
Add ability to change intensity for single interval steps in TP virtual
As mentioned, sometimes it would be useful if you could just increase/decrease the intensity of a single workout step and every step afterwards jumps back to the 100%.
2 votes -
Add setting to disable automatic logout on mobile
The mobile app will force logout on a schedule that cannot be altered by the user. This creates repeating cases where the athlete attempts to open the app and is forced to login again. This is onerous when it occurs during an activity when the athlete is looking at the app for details of the workout.
Add a setting to control the duration of the automatic logout on the mobile app. Include an option to disable the automatic logout entirely.
2 votes -
Export single workout into a CSV
I usually export the .FIT file and then cnvert it into a .CSV to make my own Excel data analysis but it takes me a lot of time.
Wouldn't be possible to go straight from Training Peaks to a CSV?2 votes -
Bulk Edit Athlete Notifications by Group
when adjusting notification settings for all my athletes, i should be able to see the athletes by group, such that i can adjust an entire group's notification settings at once. for example, i have a group of athletes that i am "casually coaching", where i don't necessarily need to be notified when they complete a workout or set a new threshold. but another group of athletes, i do need these notifications. and rather than memorize which athlete is what group, i'd like to adjust notification settings on a group basis, rather than an individual basis.
thanks!2 votes -
Support for Omron blood pressure monitors
For tracking blood pressure, Omron seems to be the go-to brand for both healthcare professionals and ordinary people. I feel that tracking blood pressure, should be relevant over time, even for athletes in good health. I also feel that it’s really nice to track all health metrics in one place.
Omron has support for their Connect App for many of their models, it already syncs with Apple or Google Health, so this should be an quick and easy integration for you.2 votes -
Lap time data Speed Skating
I’m a skating coach and use TrainingPeaks to analyze and create training plans. In speed skating, we don’t have power meters to measure training load alongside heart rate data. However, we do have lap times measured with a transponder, and these lap times provide a good indication of training intensity, similar to how a power meter works in cycling.
I was wondering if it’s possible to use lap times as custom zones in TrainingPeaks, so that I can analyze what percentage of a training session was completed in each lap time zone, similar to speed zones in running or power…
2 votes -
Workout Builder: Skip last repeated recovery
It's be nice if there was an option to skip the last recovery interval of a repeating block so that I can program in a longer recovery or endurance section.
2 votes -
Connect to weight lifting app, "HEVY"
Connect to the weight lifting app "HEVY", so that workouts get transferred to TP
2 votes -
GPX routes in scheduled trainings
currently there is an option to use GPX routs in events but would it be possible to have an extension from the GPX routes from the scheduled events to the trainings options so you can train on your own routes and prepare for real live competitions in "zen mode" while doing scheduled trainings without setting an event and having the option to ride your own route when ever you need
2 votes -
Different unit for different sports
It would be nice to have the ability to select different unit system for different sports. For example, I use English units for my run log (mile, min/mile, ...) and I keep my swimming log under metric system (m, min/100m, ...
TrainingPeak's support confirmed with me that this is not possible with current version of TP. I really hope this can be included in future releases.1 vote -
Remove the requirement to enter threshold power in order for NP to be calculated.
Could TP remove the requirement to enter threshold power in order for NormPower to be calculated? Since threshold power is not a variable that's a part of the algorithm it's hard to understand why this is required. Not all coaches base their training or ranges around "Threshold" so it's a bit unclear as to why this must be done and would be helpful to not have to enter default data that does not have any bearing on the athlete just to use the NP functionality in the graphs.
1 vote -
Nutrition tracking by workout would be helpful - as opposed to just breakfast, lunch, dinner and snack
Being able to track nutrition by workout (calories / hydration per exercise) would be helpful. Especially for long workouts where nutrition planning is important.
1 voteUnder Settings, Diary Settings in your MyFitnessPal account, you can rename and add/remove meals to customize to your needs:
http://www.myfitnesspal.com/account/diary_settings
This will still be rolled up into one grouping in TP, but you can at least separate out in MFP.
-
Can the units be customized per workout
I generally work in statute units. But occasionally I would like information to be displayed within an individual workout in metric. The most common being when running on a track. (But also when swimming in a "meters" pool). I would like to be able to configure specific workouts to display in metric. (Bonus points if the distances can be metric, but speeds/paces in statute.)
1 voteWe are going to start with customizing by workout type, after that we may consider customizing by individua workout.
-
NP Peak Power Curve
There should be a option to display peak power curve in NP rather than AP. I think this would be nice since i know many of my best efforts have been done with quite undulating terrain, which has resulted in a fair bit of discrepancy between my AP and NP for the effort (particularly during a long HC climb that includes a few descents) .
1 voteThis will be a feature of WKO4. It will be some time before this is implemented online.
-
A few new email options
Paying subscriber here- would love 2 new email options (one minor, one a tiny bit bigger)
1) New email option to send out emails when a workout is added by a coach
2) Tell me the time zone of the e-mail send options
1 vote -
TSB Metric
Adding a chart that allows us to view TSB data over time would be beneficial. I know I can see the values on the Performance Manager screen/chart, but I would like to view this data in the same way I can view my Fitness History chart (e.g., tabular and by week/day). This would allow athletes a quick way to see their current TSB to determine if they are headed for chronic fatigue (I know based on experience).
1 voteWe have plans to show today’s PMC values and ramp rates in places other than just the dashboard chart. It may not be exactly what you are asking for, but it should solve the same purpose.
-
athlete details - additional info required
When athletes have registered and you right click on the name, can the space in this basic block be increases to include the following info to be loaded by the athlete
- birthdate (remember usa format of mm/dd/yy is different to that used in the rest of the world dd/mm/yy)
- weight and height (remember that we are metric and you are still imperial )
-and the following info to be loaded by the coach
- Peak power
- FTP score
- comments section that the coach can add other notes1 voteWe are considering making changes to the Athlete Tomahawk in the future. What exact changes are still being discussed, which makes your feedback very timely!
- Don't see your idea?