999 results found
-
FTP / Weight graph (Power to weight ratio)
Based on the concept of thrust to weight ratio (https://en.wikipedia.org/wiki/Thrust-to-weight_ratio), it would be nice to have a graph that tracks:
FTP in seconds (power) / weight
I currently have to do this calculation myself and hide it in the 'waist' metric to display it as a graph.
3 votes -
Auto Title Workouts Based on Location
TrainingPeaks should auto title non-planned workouts based on location similar to Garmin connect. Currently completed workouts are titled with "Untitled". This fills up my calendar and makes it hard to single out workouts. Instead each completed workout without a title should automatically be titled based on the workout's location data.
3 votes -
trainingpeaks ConnectIQ App - existing device support (or lack thereof)
The new ConnectIQ app (released today) does not support the 920XT/Fenix3 and most other devices of that generation.
Given that the 935 and the Fenix5 devices have only been released in the very recent past...that means that your "new" app supports only a very small percentage of the real Garmin / TP user community. I understand the desire/need to announce support for the 935 on launch day....
...but, NOT providing support for the actual current userbase at the same time is VERY LAME.
3 votesThe app uses a few new features of the Connect IQ 2.2 SDK, which allows content to be downloaded, stored, and executed on the device. Unfortunately, the 920XT and Fenix 3 are both CIQ 1.x devices, so our app will not run on those devices.
Currently the supported devices are:
Edge 1000, 820, & 520
FR935
FR735XT – pending a firmware update
Fenix 5 – all variants
Fenix Chronos – pending a firmware updateIf you have a Fenix 3 or 920XT you can still get workouts from TrainingPeaks on to your device. I agree that it is a lot of steps, but you could do this in batch once or twice a week to save some time.
https://help.trainingpeaks.com/hc/en-us/articles/115001076908-Structured-Workout-Export-for-Garmin-Devices -
Export 0watt blocks as FreeRide segments to Zwift
Using free-ride segments in Zwift is often used for short max efforts. Now its not possible to export certain blocks as a free-ride segment i.s.o. a steady-state segment. This means you still need to edit the workout in Zwift.
A solution would be that a block set to 0 watt would be exported to a free-ride segment for a Zwift workout.
22 votesRPE based workouts can now be exported to Zwift. These workouts use Free Ride blocks along with text messages to communicate the target RPE. During a free ride block the trainer will be in ERG mode and respond to changes in the simulator. This is a good option for building FTP test workouts since the trainer will not be locked in to a specific power target.
-
Possibility to choose how the tss is calculated in a part of the activity
it could nice to have the possibility to choose for some laps which kind of tss is calculated. for example, for long, steep and technical mountain bike downhill, the tss from power is very low because it's not possible to pedal a lot, but the heart is more than >160bpm (i rode some maxiavalanche, 20' of downhill marathon, 122w avg and 171bpm avg, 122w for me is 32% of ftp an 171bpm is near threshold)
The same for steep Uphill or downhill during trail running1 vote -
Sync data from Lifetrak Zoom
It would be fantastic to be able to sync data from the Lifetrack Zoom HRV tracker.
Here is the link to make it happen. https://lifetrakusa.com/affiliates/developers/
Thanks!
3 votesCurrently we leave it up to the HRV app developers to write data to TrainingPeaks. This is a more efficient solution and the data shows up in TrainingPeaks faster.
More information on our partner API can be found here:
http://help.trainingpeaks.com/hc/en-us/articles/234441128-TrainingPeaks-API -
The blocks of exercises
For a coach working in the program will become more comfortable and convenient, if you have the ability to create blocks of exercises for the athlete, for example, the athlete has morning training and evening training, morning running and stretching, night Jogging, stretching and strength. And it would be great to have a clear division into blocks in the calendar for morning exercises and evening exercises. And the ability to create these blocks by different criteria and to assign them names in a free form.
3 votes -
Use speedzones in workout builder
In workout builder it would be nice to use speedzones, as an other way to build your workout. Right now it is only % of threshold speed that are possible to use. You have a lot of possibilities to find Your speedzones, but no way of using them in your workout. As for right now you can only use speedzones to analyse your training, and not to plan it
1 vote -
I have a suggestion (I'm sure I'm not the first) on your training calendar. When a task is completed as specified the box on the calendar is
I have a suggestion (I'm sure I'm not the first) on your training calendar. When a task is completed as specified the box on the calendar is green. When not completed or partially completed I see a yellow box for bad boy or a red box for a very bad boy. What I don't understand is when I'm a good boy and do some extra work I still get bad boy or very bad boy colors. Have you considered changing the colors on the good boy side of things so when I look at my total calendar I know when…
1 voteWe are investigating using different colors for over vs. under however the colors are often used by both athletes and coaches to determine how accurately they’ve followed a prescribed training regime and thus knowing when you’ve overtrained is often just as important as when you’ve undertrained.
-
Set Workout builder to measure by Zone
Love the new Workout builder, but would like to measure by zones. Easier to select zone than to reenter the %HR since I've already the appropriate ranges for each zone in setup.
2 votesGreat suggestion. We’ve struggled with this as the workout may be created based on a zone methodology different from an athlete’s or multiple athletes’ zones. Thus Zone 2 per the workout may not map correctly to different users depending on each users’ specific zone settings. We will continue to look into this as we agree planning and execution of workouts is often based on zones – we’re just wanting to ensure if we do enable this, it’s usable for athletes with differing zone settings/methodologies. Thanks for your feedback!
-
Workout Builder - edit via window
I love the new workout builder. It would be a bit easier to type in interval information in a window form in addition to dragging to increase/decrease duration or intensity. Dragging is not that precise and is a bit cumbersome for my liking.
1 voteYou should be able to enter this information directly into the “Workout Details Editor” section in the lower right once you’ve created the basic structure by dragging/clicking the blocks on your workout. Please let me know if for some reason this isn’t working for you. Thanks!
-
Threshold auto adjustment
I recently uploaded a 2 + year old running file from when I was running much faster than I currently am. My running threshold was auto reset based on this old data, completely disregarding every run I've done since then. Thankfully I saw the email from TP and adjusted it back, but it was quite annoying. I think threshold should only be auto updated based on current data, or there could be a toggle button to turn it on/off for a particular file on manual upload. But this makes me wonder what happens when lots of old data is synced…
1 voteWe will notify you and/or auto apply an new threshold from a newly uploaded workout. Unfortunately, the threshold change is determined by comparing files in your workout history, not only recently completed workouts. However, in your settings > zones > notifications you are able to select if you would like to be notified of a threshold change and if you’d like to auto apply the threshold change. So by unchecking the auto apply box, you can ensure your thresholds will not be changed when you upload new workouts. Hope this helps.
-
Have title of workout field have the ability to remember workout names.
Have title of workout field have the ability to remember workout names. I have certain workouts that I repeat on a regular basis. It would be nice to be able to populate a dropdown with these names so I don't have to type them in.
1 voteFor workouts which you repeat on a regular basis, you can save the workout to your workout library and simply drag and drop the saved workout to your calendar. Hope this helps.
-
email subject line
New updated are great. Can you change your email subject line back to what it was. I have set up rules in outlook to move athlete notification emails to specific folders. With the current subject line, Athlete Name, Date, "workout has been updated..." I cant set up outlook to move the email messages. The old subject line, Athlete name, "workout scheduled on", date, has been updated works perfectly.
Thanks for your consideration. James Schaefer1 voteThanks for your feedback. We will certainly consider your request when we revisit some of our email templates.
-
Sport specific units?
Would be great to be able to have units as say statute for bike& run but metric for swim as we have 25mtr pools in uk?
Most uk athletes I know run & bike in miles but swim in Mtrs.4 votesAt this point, you can change your specific swim units within your workout separate from your overall unit settings. Unfortunately, swimming is the only category we’ve enabled separate units for at this time. Thanks for your feedback.
-
Have TSS, and Acute (ATL) and Chronic Training Load (CTL) all have the same Y axis scale.
Since the PMC is supposed to be an "at a glance" chart, it will be much more intuitive to see if a day's workout is above / below the ATL/CTL plots if they all were on the same scale.
I see that this idea has been offered up before but declined in 2014. Since I no rationale was given, I thought I would bring it up again in the hope that with the all the changes you have made to TrainingPeaks it would be an easy enhancement.
9 votesGreat question. We’ve continued to ponder this. We use a different Y-axis scale to display TSS, ATL and CTL so that a user is better able to discern the (relatively) small changes in CTL which are key to tracking training performance. If the TSS scale was the same as ATL and CTL, the larger changes and thus scale of TSS would likely make it difficult to easily monitor changes in CTL.
-
HRV sync from Inner Balance
Provide the ability to sync HRV as a TP metric from the Inner Balance app. Syncing HRV from SweetBeat is great, but Inner Balance is also a popular platform that is sometimes more convenient to use.
3 votesWe are happy to work with Inner Balance and provide them access to our API for syncing HRV data. I would recommend that you to reach to Inner Balance and have them contact us if they are interested.
-
pro's data
I wanna check the immortal pro's data, like Froome, Nino schurter, Julien Absalon, would you kindly show me the way?
1 voteWe often provide data from our professional athletes whom have been so kind as to expressly allow us to do so. You can find this information on our blog as well as our social posts. Thanks for your suggestion.
-
Support novel metrics
There are lots of new devices and even more metrics, which are even less consistent across devices.
Rather than killing yourself trying to add new data types allow data to be uploaded with a name, giving the responsibility for naming the metric to the people writing the data file.
In my particular case I have a runscribe and would like to combine their data with the data Suuonto Movescount automatically uploads, but I can see how there are probably not enough people with the same device for you to do so. Although if you added up all the users of…
22 votes -
Offline work in coaching edition and sync when Internet service returns
I see a real need for the TP Coaching Edition to have the functionality to be used offline when connectivity is not available so you can write programs. When service is established, a synch would occur.
21 votesThanks so much for your feedback. While we agree that off-line planning mode would provide an opportunity for training prep and analysis when connectivity is not available, this would require a major redesign of our platform and thus not something we could tackle in the near-term.
- Don't see your idea?