1363 results found
-
Running Efficiency Factor in the Dashboard
Dear all,
Would it be possible to get a chart in the dashboard that would show the time evolution of the Running Efficiency Factor? It seems that the point is to improve with time on that one and the parameter is only available buried in each activity so far.
Here is a blog post from Joe on the matter.
https://www.trainingpeaks.com/blog/the-efficiency-factor-in-running/
Thank you very much!
80 votes -
View zone distribution for planned workout blocks
On the Calendar page's weekly summary, show zone distribution for planned workouts.
So, for example, if following an 80/20 regimen with a week-on-week increase in TSS, this would enable an athlete to raise training workload for the week while maintaining their prescribed proportion of HIIT vs endurance.
42 votesThank you for the feedback. This is a common request and has been added to that project’s feedback.
Future opportunities have not been added to our road map yet, but we are actively collecting feedback which contributes to the prioritization process. We do not want to set up false expectations and want to make sure that there is awareness that this update currently is not prioritized and does not have an ETA.
-
Missed workout notification
A notification to coaches that an athlete has missed a scheduled workout. Perhaps notifications linked to the session adherence RAG status.
Often workouts are completed as planned and only need a small amount of feedback. The conversation around understanding why a workout has been missed is far more valuable to the coach-athlete relationship.
27 votesThank you for the feedback. This is a common request and has been added to that project’s feedback.
Future opportunities have not been added to our road map yet, but we are actively collecting feedback which contributes to the prioritization process. We do not want to set up false expectations and want to make sure that there is awareness that this update currently is not prioritized and does not have an ETA.
-
Allow for weekly notes in weekly summary section
Would it be possible to add a notes section for the weekly summary on the calendar page. Similar to that for the paper based training diary (Chapter 14) in the Triathletes Training Bible?
15 votesThank you for the feedback. This is a common request and has been added to that project’s feedback.
Future opportunities have not been added to our road map yet, but we are actively collecting feedback which contributes to the prioritization process. We do not want to set up false expectations and want to make sure that there is awareness that this update currently is not prioritized and does not have an ETA.
-
Add screenshot to a workout
Sometimes there's some info that it's interesting to add to your workout to share with youre trainer. In my case, I have a nimbers sheet with all the details about what I have eaten in my long sessions. I would love to add the file, or much better, an screenshot. Many thanks!
5 votes -
Scattered Graph - Save settings introduced by user
Hi there,
when using the scattered graph and introducing different views of various combinations of data channels, these settings will reset to the default every time it is closed and reopened. This does not make too many sense.
Would be a very nice feature if the settings I introduce to the scattered graph would be saved when leaving the dialogue saving it or "save and close" ...
Ideally for bike and run differently as - depending on the discipline - different combinations of channels are relevant / interesting.
What do you think?
Christoph21 votesThank you for the feedback. This is a common request and has been added to that project’s feedback.
Future opportunities have not been added to our road map yet, but we are actively collecting feedback which contributes to the prioritization process. We do not want to set up false expectations and want to make sure that there is awareness that this update currently is not prioritized and does not have an ETA.
-
vo2
I would like to see VO2max added in all tools.
39 votes -
Automatic bike selection based on ANT/BLE IDs
As a cyclist with several bikes, I'd like TrainingPeaks to be able to automatically select which bike I am using, so I can better track the wear and tear on my equipment.
In .fit files, it's possible to read the ANT+/BLE sensor serial numbers, so I think it would be relatively straightforward to link specific bikes to specific sensors.
35 votes -
mynetdiary
Having used both apps side by side for weeks, I find MyNetDiary to be a cleaner faster UI than My Fitness Pal. I find the MND accuracy at least as good if not better than MFP. I find in fitness threads that MND has a userbase that is not being recognized, and many of these users want TP integration. I think overall almost every athlete at this point wishes for ONE platform that will capture any and all the metrics that athlete wants to measure and that all the athletes preferred vendors would just sync and share this information. I…
7 votes -
Download workouts
Over the past many years I have saved alot of workout plans in the Training library. I would like to download them to word or excel or pdf as a backup save to Training peaks. I feel at the moment that TP owns my work because I have no way to take it off TP. I could loose it all one day.
If TP goes down, is hacked or changes their account rules etc I may loose years of work that went into creating the workouts. I would like to be responsible for backing up my own work.
In a…
53 votes -
A tally of ALL training hours
as an elite athlete there are a few metrics that I look for at year end.
- Total hours training
- Total tss
The total hours training should be easy for TP to program. It can even be a number right next to the pie chart.
And yes, I know I can add these up myself, but on occasion, the pie pieces are so small that the scroll over isn't accurate.
34 votes -
Option to allow the duration of peak performances to be customised
It would be very useful to be able to customise the duration of peak performances. For example as someone who competes in 25 mile time trials a 50 min duration would be very useful for comparison, where as a 60 min duration is typically useless as this is just above the typical duration of an event
38 votes -
Elevation Correction in TrainingPeaks
TrainingPeaks does not auto-apply Elevation Correction to files, for example Gramin 735xt.
Improvement would be a Elevation Correction in Trainingpeaks or a import of adjusted data in Trainingpeaks, e.g. from Garmin Connect
24 votes -
To sea avg. of selected laps
As we have laps during our trainings. Especially on & off during the intervals we can select some laps and above we can see avg speed, heart rate, power etc of selected lap
But that would be perfect if we can select multiple laps and see avg of selected laps above like in the picture. (At the moment it shows only 1 lap results)
23 votes -
display the weekly duration, mileage and TSS in the android app
display the weekly duration, mileage and TSS in the android app according to the weekly summary in the Web version.
8 votes -
TrainHeroic (Link Button) as a "add a Workout" option on TrainingPeaks Calendar
Add TrainHeroic (Link Button) as a "add a Workout" Option (Workout Type) on TrainingPeaks Calendar... which will bring a client to their TrainHeroic Login/ TrainHeroic App (Dashboard/Calendar)
This will allow clients to easily see that they have (and go to) a scheduled session on TrainHeroic.
19 votesWe will be working on a better TP and TH integration in the future.
-
Intergate a pre determined "route" via.gpx (etc) into a workout.
Add the ability to load a route, harvested from many platforms, Garmin, Strava, Kamoot, RideWith GPS, etc to plan a pre determine route or segments as part or the work out. This could be imported as a past workout or a "planned" work out with data to be auto loaded into the current "planned" workout for time, distance, work,tss, if etc . This would be very useful for those of us that coach more locally based and are familiar with local routes, goals and times.
12 votesThank you for the feedback. This is a common request and has been added to that project’s feedback.
Future opportunities have not been added to our road map yet, but we are actively collecting feedback which contributes to the prioritization process. We do not want to set up false expectations and want to make sure that there is awareness that this update currently is not prioritized and does not have an ETA.
-
Link WKO cranklength to the crank length from the equipment linked to an activity
I've recently came to the conclusion that certain WKO data & charts do not take a custom crank length into account.
It would be good if the crank length (accessible using the
cranklengthexpression variable) could be sent along with the activity data from TP to WKO, and used for data & charts of that activity in WKO.I think this can be solved in a rather generic & future proof way.
- Add an 'equipment' property to an activity when sending data from TP to WKO.
- This property can include things like the bike used for the activity,…9 votes -
% Completed Vs Planned Sessions
As a coach I’d find it very useful to be able to view Percentage Complete versus Planned sessions. So an overall % and per discipline, per week, per month or whatever dates you requested.
The data for this already exists with Tp so this would be easily achieved for the developers.
It could be used to show an athlete their commitment to the coached plan. Also for the coach hold an athlete to account.
17 votesThank you for the feedback. This is a common request and has been added to that project’s feedback.
Future opportunities have not been added to our road map yet, but we are actively collecting feedback which contributes to the prioritization process. We do not want to set up false expectations and want to make sure that there is awareness that this update currently is not prioritized and does not have an ETA.
-
An option to convert cadence rpm to spm would be useful.
An option to convert cadence rpm to spm would be useful.
13 votes
- Don't see your idea?